Уплътнение на EMC - формуляр за устни
  • Уплътнение на EMC - формуляр за устни

Снимките са само с информационна цел. Вижте спецификацията на продукта

please use latin characters

Производител: TC SHIELDING

Уплътнение на EMC - формуляр за устни

Most elastomeric gaskets require a finite compression range to effect a seal. With solid and hollow sections problems can arise with the constraints of low clamping load and wide dimensional variance of hardware.
T C Shielding can now offer a special profile specifically developed for applications of this natureM.

 
Properties

Parameters

  • Compression deflection range of 4 to 8mm.
  • Clamping load less than 50N per metre linear length.
  • Good repeated assembly characteristics.
  • Can be used with lightweight flanges with minimal clamping load.
  • Available in a comprehensive range of materials.
  • Can be attached with PSA, rivets or clips.
  • Not only EMC shielding to 60dB typical but also environmental
    sealing to IP55 and beyond.

The lip is produced by continuous extrusion and can be supplied in strip, roll or fabricated to form an enclosure gasket with fully vulcanised joints.

По-малко
Прочетете още

Изпратете запитване

Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?

Свържете се с нас
ПОИСКАЙТЕ ПРОДУКТА close
Благодарим ви, че изпратихте съобщението си. Ние ще отговорим възможно най-скоро.
ПОИСКАЙТЕ ПРОДУКТА close
Преглед
изпратете запитване

Добави към списъка с желания

Трябва да сте влезли

Most elastomeric gaskets require a finite compression range to effect a seal. With solid and hollow sections problems can arise with the constraints of low clamping load and wide dimensional variance of hardware.
T C Shielding can now offer a special profile specifically developed for applications of this natureM.

 
Properties

Parameters

  • Compression deflection range of 4 to 8mm.
  • Clamping load less than 50N per metre linear length.
  • Good repeated assembly characteristics.
  • Can be used with lightweight flanges with minimal clamping load.
  • Available in a comprehensive range of materials.
  • Can be attached with PSA, rivets or clips.
  • Not only EMC shielding to 60dB typical but also environmental
    sealing to IP55 and beyond.

The lip is produced by continuous extrusion and can be supplied in strip, roll or fabricated to form an enclosure gasket with fully vulcanised joints.

По-малко
Прочетете още
Коментари (0)