![Уплътнения и EMC Контакт / Контакт Уплътнения и EMC Контакт / Контакт](https://www.dacpol.eu/8758-large_default/upltneniya-i-emc-kontakt-kontakt.jpg)
![Уплътнения и EMC Контакт / Контакт Уплътнения и EMC Контакт / Контакт](https://www.dacpol.eu/8758-large_default/upltneniya-i-emc-kontakt-kontakt.jpg)
Трябва да сте влезли в
Category
Montaż urządzeń
Modernizacja induktorów
Urządzenia indukcyjne
asd
Снимките са само с информационна цел. Вижте спецификацията на продукта
please use latin characters
The company Feuerherdt GmbH now offers, as first supplier, a regularly stocked assort-ment of contact strips made of stainless steel (German material no. 1.4310). The material used is stainless strip steel for springs: a material with extraordinary toughness, good spring characteristics, and long service life. The anti-corrosion properties are excellent, with the result that the contact surfaces are always smooth and shiny. The shielding properties are good, but the damping values that can be achieved are less than with BeCu.
Material number:1.4310
Characteristics: stainless steel
spring band steel, cold-rolled
DIN 17224, EN 10258
Mechanical properties:
Tensile strength:: 1220 (RM N/mm2)
Yield strength: 987 (RP N/mm2)
Strain: 31.00 (L=8Omm)
Chemical composition:(data given in percent) | |||
---|---|---|---|
C : 0.102 | Si : 1.130 | Mn : 1.150 | P : 0.033 |
S : 0.005 | Cr : 16.790 | Mo : 0.670 | Ni : 6.770 |
Ti : 0.000 | Al : 0.000 | Cu : 0.000 | V : 0.000 |
W : 0.000 | Cb/Ta : 0.000 | Fe : 73.350 |
Uszczelka ze stali nierdzewnej jest dostępna prawie we wszystkich dostępnych Formach. Aby zamówić należy tylko umieścić E przed wybranym modelem np.: E xxxx.
Podobnie jak w/w materiałem bardzo często, a nawet częściej używany jest materiał miedzi z dodatkiem berylu. Uszczelnienie CuBe charakteryzuje się wysoka skutecznością ekranowania urządzeń oraz odpornością na korozję.
Cechy fizyczne:UWAGA:
Opcjonalnie każda uszczelka może być srebrzona, złocona, cynkowana, cynowana, niklowana, inne.
Należy pamiętać, że wymiary uszczelek sprężynujących ze stali nierdzewnej V2A, mogą się różnić się od tych z materiału CuBe, ze względu na różne warunki materiału.
Można wybrać wykończenie każdej uszczelki sprężynującej. Wystarczy dodać kod wykończenia na końcu profilu wybranego.
Kod | Wymagane wykończenie powierzchni |
---|---|
-2 | jasna |
-3 | pozłacana |
-4 | posrebrzana |
-15 | chromian cynku / czysty |
-17 | cynowana |
-19 | niklowana |
lub wg. wymagań klienta |
Form (Kształt) | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
A | 3 | 1 | 6.5 | 499 | 8101 |
B | 3 | 1 | 6.5 | 499 | 8102 |
C | 3 | 1 | 6.5 | 499 | 8103 |
D | 3 | 1 | 6.5 | 499 | 8104 |
B | 3 | 1 | 6.5 | 499 | 8102 |
C | 3 | 1 | 6.5 | 499 | 8103 |
D | 3 | 1 | 6.5 | 499 | 8104 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
E | 3 | 1 | 6.5 | 499 | 8105 |
F | 3 | 1 | 6.5 | 499 | 8106 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
G | 3 | 1 | 6.5 | 499 | 8107 |
H | 3 | 1 | 6.5 | 499 | 8108 |
I | 3 | 1 | 6.5 | 499 | 8109 |
K | 1 | 3 | 6.5 | 499 | 8110 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
L | 3 | 1 | 6.5 | 499 | 8111 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
M | 3 | 1 | 6.5 | 499 | 8112 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
N | 1.5 | 0.5 | 5.5 | 500 | 8113 |
N1 | 1.5 | 0.5 | 5.5 | 500 | sty-13 |
O | 1.5 | 0.5 | 5.5 | 500 | 8114 |
P | 1.5 | 0.5 | 5.5 | 500 | 8115 |
Q | 1.5 | 0.5 | 5.5 | 500 | 8116 |
Q1 | 1.5 | 0.5 | 5.5 | 500 | sty-16 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
R | 1 | 0.5 | 3.2 | 500 | 8117 |
R1 | 1 | 0.5 | 3.2 | 500 | sty-17 |
S | 1 | 0.5 | 3.2 | 500 | 8118 |
S1 | 1 | 0.5 | 3.2 | 406 | sty-18 |
T | 1 | 0.5 | 3.2 | 500 | 8119 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
U | 3.03 | 0.97 | 9 | 503 | 8120 |
U1 | 3.03 | 0.97 | 9 | 503 | sty-20 |
U2 | 3.03 | 0.97 | 9 | 503 | lut-20 |
U10 | 3.03 | 0.97 | 9 | 503 | paź-20 |
U11 | 3.03 | 0.97 | 9 | 503 | lis-20 |
Twisted Contact Strips
Form | a [mm] |
b [mm] |
c [mm] |
L [mm] |
Part no. |
---|---|---|---|---|---|
X | 3.8 | 0.4 | 4.8 | 499 | 8501 |
3.8 | 0.4 | 4.8 | 499 | 8502 | |
3.8 | 0.4 | 4.8 | 499 | 8503 | |
3.8 | 0.4 | 4.8 | Endless | 8504 | |
X1 | 3.8 | 0.4 | 4.8 | 499 | 8505 |
X2 | 3.8 | 0.4 | 4.8 | 499 | 8506 |
Y | 3.8 | 0.4 | 4.8 | 499 | 8511 |
3.8 | 0.4 | 4.8 | 499 | 8512 | |
3.8 | 0.4 | 4.8 | 499 | 8513 | |
3.8 | 0.4 | 4.8 | Endless | 8514 |
Form | a [mm] |
b [mm] |
A | B | D | L [mm] |
Part no. |
---|---|---|---|---|---|---|---|
X3 | 3,8 | 0,4 | 4,8 | 1.0 | 4.1 | 407 | 8601 |
3,8 | 0,4 | 4,8 | 1.5 | 3.6 | 407 | 8602 | |
3,8 | 0,4 | 4,8 | 2.0 | 3.2 | 407 | 8603 | |
X4 | 3,8 | 0,4 | 6,4 | 1.0 | 5.7 | 407 | 8604 |
3,8 | 0,4 | 6,4 | 1.5 | 5.3 | 407 | 8605 | |
3,8 | 0,4 | 6,4 | 2.0 | 5.0 | 407 | 8606 |
Mini-Twisted Contact Strips
Form | a [mm] |
b [mm] |
c [mm] |
L [mm] |
Part no. |
---|---|---|---|---|---|
XM | 2 | 0,4 | 3,6 | 500 mm | 8610 |
2 | 0,4 | 3,6 | 610 mm | 8611 | |
2 | 0,4 | 3,6 | Endless | 8613 | |
X1M | 2 | 0,4 | 3,6 | 610 mm | 8614 |
X2M | 2 | 0,4 | 3,6 | 610 mm | 8615 |
Form | a [mm] |
b [mm] |
A | B | D | L [mm] |
Part no. |
---|---|---|---|---|---|---|---|
X5 | 2.0 | 0.4 | 3.8 | 1.0 | 3.7 | 405 | 8616 |
X6 | 2.0 | 0.4 | 3.8 | 1.5 | 3.5 | 405 | 8617 |
X7 | 2.0 | 0.4 | 4.7 | 1.0 | 4.5 | 405 | 8618 |
X8 | 2.0 | 0.4 | 4.3 | 1.5 | 4.4 | 405 | 8619 |
X9 | 2.0 | 0.4 | 5.9 | 1.0 | 4.7 | 405 | 8620 |
X10 | 2.0 | 0.4 | 5.9 | 1.5 | 4.3 | 405 | 8621 |
Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?
Трябва да сте влезли
The company Feuerherdt GmbH now offers, as first supplier, a regularly stocked assort-ment of contact strips made of stainless steel (German material no. 1.4310). The material used is stainless strip steel for springs: a material with extraordinary toughness, good spring characteristics, and long service life. The anti-corrosion properties are excellent, with the result that the contact surfaces are always smooth and shiny. The shielding properties are good, but the damping values that can be achieved are less than with BeCu.
Material number:1.4310
Characteristics: stainless steel
spring band steel, cold-rolled
DIN 17224, EN 10258
Mechanical properties:
Tensile strength:: 1220 (RM N/mm2)
Yield strength: 987 (RP N/mm2)
Strain: 31.00 (L=8Omm)
Chemical composition:(data given in percent) | |||
---|---|---|---|
C : 0.102 | Si : 1.130 | Mn : 1.150 | P : 0.033 |
S : 0.005 | Cr : 16.790 | Mo : 0.670 | Ni : 6.770 |
Ti : 0.000 | Al : 0.000 | Cu : 0.000 | V : 0.000 |
W : 0.000 | Cb/Ta : 0.000 | Fe : 73.350 |
Uszczelka ze stali nierdzewnej jest dostępna prawie we wszystkich dostępnych Formach. Aby zamówić należy tylko umieścić E przed wybranym modelem np.: E xxxx.
Podobnie jak w/w materiałem bardzo często, a nawet częściej używany jest materiał miedzi z dodatkiem berylu. Uszczelnienie CuBe charakteryzuje się wysoka skutecznością ekranowania urządzeń oraz odpornością na korozję.
Cechy fizyczne:UWAGA:
Opcjonalnie każda uszczelka może być srebrzona, złocona, cynkowana, cynowana, niklowana, inne.
Należy pamiętać, że wymiary uszczelek sprężynujących ze stali nierdzewnej V2A, mogą się różnić się od tych z materiału CuBe, ze względu na różne warunki materiału.
Można wybrać wykończenie każdej uszczelki sprężynującej. Wystarczy dodać kod wykończenia na końcu profilu wybranego.
Kod | Wymagane wykończenie powierzchni |
---|---|
-2 | jasna |
-3 | pozłacana |
-4 | posrebrzana |
-15 | chromian cynku / czysty |
-17 | cynowana |
-19 | niklowana |
lub wg. wymagań klienta |
Form (Kształt) | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
A | 3 | 1 | 6.5 | 499 | 8101 |
B | 3 | 1 | 6.5 | 499 | 8102 |
C | 3 | 1 | 6.5 | 499 | 8103 |
D | 3 | 1 | 6.5 | 499 | 8104 |
B | 3 | 1 | 6.5 | 499 | 8102 |
C | 3 | 1 | 6.5 | 499 | 8103 |
D | 3 | 1 | 6.5 | 499 | 8104 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
E | 3 | 1 | 6.5 | 499 | 8105 |
F | 3 | 1 | 6.5 | 499 | 8106 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
G | 3 | 1 | 6.5 | 499 | 8107 |
H | 3 | 1 | 6.5 | 499 | 8108 |
I | 3 | 1 | 6.5 | 499 | 8109 |
K | 1 | 3 | 6.5 | 499 | 8110 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
L | 3 | 1 | 6.5 | 499 | 8111 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
M | 3 | 1 | 6.5 | 499 | 8112 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
N | 1.5 | 0.5 | 5.5 | 500 | 8113 |
N1 | 1.5 | 0.5 | 5.5 | 500 | sty-13 |
O | 1.5 | 0.5 | 5.5 | 500 | 8114 |
P | 1.5 | 0.5 | 5.5 | 500 | 8115 |
Q | 1.5 | 0.5 | 5.5 | 500 | 8116 |
Q1 | 1.5 | 0.5 | 5.5 | 500 | sty-16 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
R | 1 | 0.5 | 3.2 | 500 | 8117 |
R1 | 1 | 0.5 | 3.2 | 500 | sty-17 |
S | 1 | 0.5 | 3.2 | 500 | 8118 |
S1 | 1 | 0.5 | 3.2 | 406 | sty-18 |
T | 1 | 0.5 | 3.2 | 500 | 8119 |
Form | a [mm] |
b [mm] |
c [mm] |
l [mm] |
Part no. |
---|---|---|---|---|---|
U | 3.03 | 0.97 | 9 | 503 | 8120 |
U1 | 3.03 | 0.97 | 9 | 503 | sty-20 |
U2 | 3.03 | 0.97 | 9 | 503 | lut-20 |
U10 | 3.03 | 0.97 | 9 | 503 | paź-20 |
U11 | 3.03 | 0.97 | 9 | 503 | lis-20 |
Twisted Contact Strips
Form | a [mm] |
b [mm] |
c [mm] |
L [mm] |
Part no. |
---|---|---|---|---|---|
X | 3.8 | 0.4 | 4.8 | 499 | 8501 |
3.8 | 0.4 | 4.8 | 499 | 8502 | |
3.8 | 0.4 | 4.8 | 499 | 8503 | |
3.8 | 0.4 | 4.8 | Endless | 8504 | |
X1 | 3.8 | 0.4 | 4.8 | 499 | 8505 |
X2 | 3.8 | 0.4 | 4.8 | 499 | 8506 |
Y | 3.8 | 0.4 | 4.8 | 499 | 8511 |
3.8 | 0.4 | 4.8 | 499 | 8512 | |
3.8 | 0.4 | 4.8 | 499 | 8513 | |
3.8 | 0.4 | 4.8 | Endless | 8514 |
Form | a [mm] |
b [mm] |
A | B | D | L [mm] |
Part no. |
---|---|---|---|---|---|---|---|
X3 | 3,8 | 0,4 | 4,8 | 1.0 | 4.1 | 407 | 8601 |
3,8 | 0,4 | 4,8 | 1.5 | 3.6 | 407 | 8602 | |
3,8 | 0,4 | 4,8 | 2.0 | 3.2 | 407 | 8603 | |
X4 | 3,8 | 0,4 | 6,4 | 1.0 | 5.7 | 407 | 8604 |
3,8 | 0,4 | 6,4 | 1.5 | 5.3 | 407 | 8605 | |
3,8 | 0,4 | 6,4 | 2.0 | 5.0 | 407 | 8606 |
Mini-Twisted Contact Strips
Form | a [mm] |
b [mm] |
c [mm] |
L [mm] |
Part no. |
---|---|---|---|---|---|
XM | 2 | 0,4 | 3,6 | 500 mm | 8610 |
2 | 0,4 | 3,6 | 610 mm | 8611 | |
2 | 0,4 | 3,6 | Endless | 8613 | |
X1M | 2 | 0,4 | 3,6 | 610 mm | 8614 |
X2M | 2 | 0,4 | 3,6 | 610 mm | 8615 |
Form | a [mm] |
b [mm] |
A | B | D | L [mm] |
Part no. |
---|---|---|---|---|---|---|---|
X5 | 2.0 | 0.4 | 3.8 | 1.0 | 3.7 | 405 | 8616 |
X6 | 2.0 | 0.4 | 3.8 | 1.5 | 3.5 | 405 | 8617 |
X7 | 2.0 | 0.4 | 4.7 | 1.0 | 4.5 | 405 | 8618 |
X8 | 2.0 | 0.4 | 4.3 | 1.5 | 4.4 | 405 | 8619 |
X9 | 2.0 | 0.4 | 5.9 | 1.0 | 4.7 | 405 | 8620 |
X10 | 2.0 | 0.4 | 5.9 | 1.5 | 4.3 | 405 | 8621 |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Напишете свой отзив
Review sent
Your review cannot be sent