QNix® 4600 Coating thickness gauge
  • QNix® 4600 Coating thickness gauge
  • QNix® 4600 Coating thickness gauge
  • QNix® 4600 Coating thickness gauge

Снимките са само с информационна цел. Вижте спецификацията на продукта

please use latin characters

Производител: Automation Dr. Nix GmbH & Co. KG

QNix® 4600 Coating thickness gauge

QNix® 4600

Rethinking coating thickness measurement QUALITY

With more than 100 measurements per minute, in terms of speed the QNix® 4600 can easily keep up with its measuring objects. Thanks to the handy and ergonomic design, the QNix® 4600 is in the vehicle appraisal in pole position.

The quick inspection of the paintwork succeeds reliably and accurately with the practical one-button operation. Without complex device configuration the QNix® 4600 provides precise measurement results.

Switch on, put on, read off. The large contact surface and the low centre of gravity ensure a safe placement and avoid incorrect measurements.

Whether it's powder coating or wet painting, the QNix® 4600 performs in the field of industrial painting and vehicle appraisal.

The brilliant 2" large colour LCD of the QNix® 4600 with its automatically flipping display makes readings of the measured values easier in any situation – even in low light conditions. The indication of average, standard deviation as well as the highest and lowest measured value provides all the necessary statistical information to the current series of measurements.

QNix® 4600 The Coating Thickness Gauge

TIME SAVING AND EASY OPERATION

  • Automatic substrate detection
  • High measuring speed: Put on, read off value
  • Immediate evaluation of the readings by significant statistics
  • No adjustment for standard applications needed

RELIABILITY OF VALUES THROUGH PRECISION AND CORRECTNESS

  • High trueness over the entire range
  • High repeatability of the measurement results
  • Temperature compensation directly in the probe

PROCESS RELIABILITY AND READABILITY

  • Brilliant IPS LCD, 2", colour, 350 cd / m2, viewing angle 70°
  • Automatically flipping display 0°, 90°, 180°, 270°
  • Low center of gravity with large contact surface for stable measurements

QNix® 4600 Scope of supply

Scope of supply of the QNix® 4600 Optional with Fe or Dual probe

  • Gauge QNix® 4600
  • Fe and NFe reference plate
  • Calibration certificate
  • Operation manual
  • 2 Mignon batteries 1,5 V (AA) alkaline
  • Plastic case for transport and storage

QNix® 4600 with automatically flipping display

Bright, 2" large colour display for an easy reading even under low light conditions

Measured value of the coating thickness in μm or mil

Average value

Maximum measured value of the current series of measurements

Minimum measured value of the current series of measurements

Standard deviation

Easy to use by one button

Large contact surface for a stable placement to avoid incorrect measurements

Automatically flipping display

Electrical details

Power supply 2 × AA (batteries or rechargeable batteries)
Battery life when gauge is not in use at min. 50 % battery capacity > 1 year
Battery life at one measurement per second up to 40.000 readings
Display IPS-LCD, 2", colour, 350 cd / m2, viewing angle 70° all directions

Weight and dimensions

Dimensions (H x W x D) 135 × 63 × 43 mm
Weight 100 g

Environmental conditions

Operating temperature 0 °C to +50 °C / 32 °F to 122 °F
Storage temperature -20 °C to +70 °C / -4 °F to 158 °F
Climatic conditions 10 to 90 % relative humidity, non-condensing

Metrological characteristics

Measuring principle magnetic: magnetic field amendment / hall-effect Fe / eddy-current NFe
Measuring speed (measurements per minute) ≥ 100
Accuracy of measurement on Fe substrates related to QNix® reference standards ± (1 μm + 2 % of the reading) to 2,0 mm
± 5 % of the reading from 2,0 mm
Accuracy of measurement on NFe substrates related to QNix® reference standards ± (2 μm + 2 % of the reading) to 2,0 mm
± 5 % of the reading from 2,0 mm
Smallest measuring surface Fe / NFe diameter 28 mm
Smallest curvature konvex Fe 10 mm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
Smallest curvature konvex NFe 50 mm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
Minimum thickness of base metal Fe 100 μm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
Minimum thickness of base metal NFe 50 μm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
По-малко
Прочетете още

Изпратете запитване

Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?

Свържете се с нас
ПОИСКАЙТЕ ПРОДУКТА close
Благодарим ви, че изпратихте съобщението си. Ние ще отговорим възможно най-скоро.
ПОИСКАЙТЕ ПРОДУКТА close
Преглед
изпратете запитване

Добави към списъка с желания

Трябва да сте влезли

QNix® 4600

Rethinking coating thickness measurement QUALITY

With more than 100 measurements per minute, in terms of speed the QNix® 4600 can easily keep up with its measuring objects. Thanks to the handy and ergonomic design, the QNix® 4600 is in the vehicle appraisal in pole position.

The quick inspection of the paintwork succeeds reliably and accurately with the practical one-button operation. Without complex device configuration the QNix® 4600 provides precise measurement results.

Switch on, put on, read off. The large contact surface and the low centre of gravity ensure a safe placement and avoid incorrect measurements.

Whether it's powder coating or wet painting, the QNix® 4600 performs in the field of industrial painting and vehicle appraisal.

The brilliant 2" large colour LCD of the QNix® 4600 with its automatically flipping display makes readings of the measured values easier in any situation – even in low light conditions. The indication of average, standard deviation as well as the highest and lowest measured value provides all the necessary statistical information to the current series of measurements.

QNix® 4600 The Coating Thickness Gauge

TIME SAVING AND EASY OPERATION

  • Automatic substrate detection
  • High measuring speed: Put on, read off value
  • Immediate evaluation of the readings by significant statistics
  • No adjustment for standard applications needed

RELIABILITY OF VALUES THROUGH PRECISION AND CORRECTNESS

  • High trueness over the entire range
  • High repeatability of the measurement results
  • Temperature compensation directly in the probe

PROCESS RELIABILITY AND READABILITY

  • Brilliant IPS LCD, 2", colour, 350 cd / m2, viewing angle 70°
  • Automatically flipping display 0°, 90°, 180°, 270°
  • Low center of gravity with large contact surface for stable measurements

QNix® 4600 Scope of supply

Scope of supply of the QNix® 4600 Optional with Fe or Dual probe

  • Gauge QNix® 4600
  • Fe and NFe reference plate
  • Calibration certificate
  • Operation manual
  • 2 Mignon batteries 1,5 V (AA) alkaline
  • Plastic case for transport and storage

QNix® 4600 with automatically flipping display

Bright, 2" large colour display for an easy reading even under low light conditions

Measured value of the coating thickness in μm or mil

Average value

Maximum measured value of the current series of measurements

Minimum measured value of the current series of measurements

Standard deviation

Easy to use by one button

Large contact surface for a stable placement to avoid incorrect measurements

Automatically flipping display

Electrical details

Power supply 2 × AA (batteries or rechargeable batteries)
Battery life when gauge is not in use at min. 50 % battery capacity > 1 year
Battery life at one measurement per second up to 40.000 readings
Display IPS-LCD, 2", colour, 350 cd / m2, viewing angle 70° all directions

Weight and dimensions

Dimensions (H x W x D) 135 × 63 × 43 mm
Weight 100 g

Environmental conditions

Operating temperature 0 °C to +50 °C / 32 °F to 122 °F
Storage temperature -20 °C to +70 °C / -4 °F to 158 °F
Climatic conditions 10 to 90 % relative humidity, non-condensing

Metrological characteristics

Measuring principle magnetic: magnetic field amendment / hall-effect Fe / eddy-current NFe
Measuring speed (measurements per minute) ≥ 100
Accuracy of measurement on Fe substrates related to QNix® reference standards ± (1 μm + 2 % of the reading) to 2,0 mm
± 5 % of the reading from 2,0 mm
Accuracy of measurement on NFe substrates related to QNix® reference standards ± (2 μm + 2 % of the reading) to 2,0 mm
± 5 % of the reading from 2,0 mm
Smallest measuring surface Fe / NFe diameter 28 mm
Smallest curvature konvex Fe 10 mm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
Smallest curvature konvex NFe 50 mm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
Minimum thickness of base metal Fe 100 μm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
Minimum thickness of base metal NFe 50 μm – Zero point adjustment on original substrate (accuracy checked up to 250 μm)
По-малко
Прочетете още
Коментари (0)