Лак ЕПОКСИДНО-АЛКИДЕН модифициран E521, E521T, E521ATX
  • Лак ЕПОКСИДНО-АЛКИДЕН модифициран E521, E521T, E521ATX

Снимките са само с информационна цел. Вижте спецификацията на продукта

please use latin characters

Производител: SEG

Лак ЕПОКСИДНО-АЛКИДЕН модифициран E521, E521T, E521ATX

Material is one component, for electrical insulation class F 155°C dry in drier.

Application:
- electro technical material class B and F,

Main preferences:
- impregnation lacquer made from modified alkyd - epoxide resin, great dielectric withstand and elastic preferences.
- it is resistant for humidity and transformer oils.
- it is compatible with cables in enamel class B, F and H,
- E521 T (tropical version) meets requirements 41514 NFX.

Material impregnation:
-By immersion, or vacuum. Its good stability allows to impregnate electrical devices, which are hot. However, it cannot be generalised to all motor types.
-lacquer hardens when polymerisation occurs without any oxidation. It is recommended to check if the diluent is removed when the drying begins.  

Polymerisation :
- preliminary component drying (40 4 50°C max.),
- immersion unit air blisters disappear
- drying depends on the weight of impregnated material.
- rise temperature up to 130°C,
- drying:
          class B: 4 hours in temp. 130 4 140°C,
          class F: 4 hours in temp. 150 4 160°C,
- Dry time can be changed according to the component weight,

Storage conditions:
12 months in original and closed package, far away from the sun and heat source

Packing:
-containers 1, 5 , 30 l or barrels 200 l.

Hygiene and protection:
Lacquer consists ksylen.

Lacquer Standard E521TE521AT E 521 ATX
Chemical origins   modified alkyd - epoxide modified alkyd - epoxide
Thermal class   (F)/155°C (F)/155°C
viscosity ISO 2431 40s +/-10s 40s+/-10s
density @ 20°C NFT30020 0,98 0,98
Ignition point - crucible closed NFT30020 26°C 26°C
Dry extract NSEG 0001 45% +/- 2 45% +/- 2
Colour   Orange Pomarańczowy
Drying on a plate NSEG 0002w150°C2 @ 150°C 2 h w 150°C45 min.
Diluent   37022 37022

Preferences:

Breakdown on a copper plate [thickness 0,01 mm] Volt
natural state 1400
After 8 days in humid air: 1250
After 8 days in destilated water: 1200
After 8 days in oil: 1430
По-малко
Прочетете още

Изпратете запитване

Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?

Свържете се с нас
ПОИСКАЙТЕ ПРОДУКТА close
Благодарим ви, че изпратихте съобщението си. Ние ще отговорим възможно най-скоро.
ПОИСКАЙТЕ ПРОДУКТА close
Преглед
изпратете запитване

Добави към списъка с желания

Трябва да сте влезли

Material is one component, for electrical insulation class F 155°C dry in drier.

Application:
- electro technical material class B and F,

Main preferences:
- impregnation lacquer made from modified alkyd - epoxide resin, great dielectric withstand and elastic preferences.
- it is resistant for humidity and transformer oils.
- it is compatible with cables in enamel class B, F and H,
- E521 T (tropical version) meets requirements 41514 NFX.

Material impregnation:
-By immersion, or vacuum. Its good stability allows to impregnate electrical devices, which are hot. However, it cannot be generalised to all motor types.
-lacquer hardens when polymerisation occurs without any oxidation. It is recommended to check if the diluent is removed when the drying begins.  

Polymerisation :
- preliminary component drying (40 4 50°C max.),
- immersion unit air blisters disappear
- drying depends on the weight of impregnated material.
- rise temperature up to 130°C,
- drying:
          class B: 4 hours in temp. 130 4 140°C,
          class F: 4 hours in temp. 150 4 160°C,
- Dry time can be changed according to the component weight,

Storage conditions:
12 months in original and closed package, far away from the sun and heat source

Packing:
-containers 1, 5 , 30 l or barrels 200 l.

Hygiene and protection:
Lacquer consists ksylen.

Lacquer Standard E521TE521AT E 521 ATX
Chemical origins   modified alkyd - epoxide modified alkyd - epoxide
Thermal class   (F)/155°C (F)/155°C
viscosity ISO 2431 40s +/-10s 40s+/-10s
density @ 20°C NFT30020 0,98 0,98
Ignition point - crucible closed NFT30020 26°C 26°C
Dry extract NSEG 0001 45% +/- 2 45% +/- 2
Colour   Orange Pomarańczowy
Drying on a plate NSEG 0002w150°C2 @ 150°C 2 h w 150°C45 min.
Diluent   37022 37022

Preferences:

Breakdown on a copper plate [thickness 0,01 mm] Volt
natural state 1400
After 8 days in humid air: 1250
After 8 days in destilated water: 1200
After 8 days in oil: 1430
По-малко
Прочетете още
Коментари (0)