Joystick AJ3
  • Joystick AJ3

Fotografie slouží pouze pro informační účely. Zobrazit specifikaci produktu

please use latin characters

Výrobce: Sensata

Joystick AJ3

Joystick AJ3

The AJ3 Joystick provides the reliability required in challenging environmental conditions, such as heavy industry. Its high mechanical durability and unique sensor construction make this joystick ideal for use even in the toughest conditions. The AJ3 Joystick is designed to fit standard and custom multi-function grips.

Features

  • Non-contact detection – Hall effect
  • Life expectancy of over 5 million cycles
  • 2 sensors per axis
  • Integrated temperature compensation
  • Standard or custom multi-function grips
System Voltage 12 or 24V
Voltage Range 8-16V or 8-30V
Maximum Current 180 mA at 24V DC
Max. Output Voltage Vsupply – 2.5V DC
Output Voltage (Max. Output Current 5mA)
PWM Output		 V01
V02
V08
V09
PW2		 0V … (Vsupply - 2.5V DC)
0 … 5V DC
0.5 … 4.5V DC
25% Vsupply … 75% Vsupply
500 Hz ± 80 Hz
CAN Bus Output CA1…
CA2…
J19		 CAN 2.0A (11 bit identifier)
CAN 2.0B (29 bit identifier)
SAE J1939
Center Position Output (Signal) C2
C3		 Inactive 0V / Active 5V
Inactive 0V / Active Vsupply
Other Electrical Features EMI 100 V/m


Life Expectancy Over 5 million cycles
Operating Temperature -40°C to 85°C
Operational Force 0.56 Nm, 1.2 Nm, 1.7 Nm, 2.2 Nm
Maximum Horizontal Load 100 Nm
Maximum Vertical Load 1000 Nm
Maximum Load (Z Axis) 20 Nm
IP Protection IP 65
Méně
Přečtěte si více

Zašlete dotaz

Máte zájem o tento produkt? Potřebujete další informace nebo individuální ceny?

Kontaktujte nás
ZEPTEJTE SE O PRODUKT close
Děkujeme za zaslání zprávy. Odpovíme co nejdříve.
ZEPTEJTE SE O PRODUKT close
Procházet
pošlete dotaz

Přidat do seznamu přání

musíš být přihlášen

Joystick AJ3

The AJ3 Joystick provides the reliability required in challenging environmental conditions, such as heavy industry. Its high mechanical durability and unique sensor construction make this joystick ideal for use even in the toughest conditions. The AJ3 Joystick is designed to fit standard and custom multi-function grips.

Features

  • Non-contact detection – Hall effect
  • Life expectancy of over 5 million cycles
  • 2 sensors per axis
  • Integrated temperature compensation
  • Standard or custom multi-function grips
System Voltage 12 or 24V
Voltage Range 8-16V or 8-30V
Maximum Current 180 mA at 24V DC
Max. Output Voltage Vsupply – 2.5V DC
Output Voltage (Max. Output Current 5mA)
PWM Output		 V01
V02
V08
V09
PW2		 0V … (Vsupply - 2.5V DC)
0 … 5V DC
0.5 … 4.5V DC
25% Vsupply … 75% Vsupply
500 Hz ± 80 Hz
CAN Bus Output CA1…
CA2…
J19		 CAN 2.0A (11 bit identifier)
CAN 2.0B (29 bit identifier)
SAE J1939
Center Position Output (Signal) C2
C3		 Inactive 0V / Active 5V
Inactive 0V / Active Vsupply
Other Electrical Features EMI 100 V/m


Life Expectancy Over 5 million cycles
Operating Temperature -40°C to 85°C
Operational Force 0.56 Nm, 1.2 Nm, 1.7 Nm, 2.2 Nm
Maximum Horizontal Load 100 Nm
Maximum Vertical Load 1000 Nm
Maximum Load (Z Axis) 20 Nm
IP Protection IP 65
Méně
Přečtěte si více
Komentáře (0)