Regulátor hladiny řadiče duální úrovni
  • Regulátor hladiny řadiče duální úrovni

Fotografie slouží pouze pro informační účely. Zobrazit specifikaci produktu

please use latin characters

Výrobce: Deeter Electronics Ltd

Regulátor hladiny řadiče duální úrovni

The Dual Level Controller provides adjustment of the liquid level in the tank between two points, and / or provides an additional output in the event of overfilling or complete emptying of the tank. The DLC provides safe low voltages for level sensors and is equipped with contactors to control the operation of the pump or valves in gravity fed systems from above. The DLC-1 has 1 relay that can be configured to provide regulation between two levels or to provide a buffer for a single float. The DLC-2 model has an additional independent relay that can be used for any purpose. For example, additional protection of the pump against dry running by means of an additional float sensor. The DLC-3 model is characterized by a higher degree of IP65 than the DLC-2

  • Enables the use of low-current float sensors to control high-load systems.
  • Extends the life of float sensors, pumps and valves by reducing cycle times.
  • Low voltage power supply for potentially wet circuits with float sensors
  • Quick and easy installation.
Méně
Přečtěte si více

Zašlete dotaz

Máte zájem o tento produkt? Potřebujete další informace nebo individuální ceny?

Kontaktujte nás
ZEPTEJTE SE O PRODUKT close
Děkujeme za zaslání zprávy. Odpovíme co nejdříve.
ZEPTEJTE SE O PRODUKT close
Procházet
pošlete dotaz

Přidat do seznamu přání

musíš být přihlášen

The Dual Level Controller provides adjustment of the liquid level in the tank between two points, and / or provides an additional output in the event of overfilling or complete emptying of the tank. The DLC provides safe low voltages for level sensors and is equipped with contactors to control the operation of the pump or valves in gravity fed systems from above. The DLC-1 has 1 relay that can be configured to provide regulation between two levels or to provide a buffer for a single float. The DLC-2 model has an additional independent relay that can be used for any purpose. For example, additional protection of the pump against dry running by means of an additional float sensor. The DLC-3 model is characterized by a higher degree of IP65 than the DLC-2

  • Enables the use of low-current float sensors to control high-load systems.
  • Extends the life of float sensors, pumps and valves by reducing cycle times.
  • Low voltage power supply for potentially wet circuits with float sensors
  • Quick and easy installation.
Méně
Přečtěte si více
Komentáře (0)