![MTL4517-MTL5517 2-kanálový separátor MTL4517-MTL5517 2-kanálový separátor](https://www.dacpol.eu/7422-large_default/mtl4517-mtl5517-2-kanalovy-separator.jpg)
![MTL4517-MTL5517 2-kanálový separátor MTL4517-MTL5517 2-kanálový separátor](https://www.dacpol.eu/7422-large_default/mtl4517-mtl5517-2-kanalovy-separator.jpg)
Musíte být přihlášen
Fotografie slouží pouze pro informační účely. Zobrazit specifikaci produktu
please use latin characters
The MTLx517 enables two safe-area loads to be controlled, through a relay, by proximity detectors or switches located in a hazardous area. Line faults are signalled through a separate relay and indicated on the top of the module. Switches are provided to select phase reversal and to enable the line fault detection.Specification
(*) Resistors must be fitted when using the LFD facility with a contact input: 500 Ohm to 1kΩ in series with switch 20 kOhm to 25kΩ in parallel with switch (**) Note: reactive loads must be adequately suppressed. |
Relay characteristics
SIL capable
|
Máte zájem o tento produkt? Potřebujete další informace nebo individuální ceny?
musíš být přihlášen
The MTLx517 enables two safe-area loads to be controlled, through a relay, by proximity detectors or switches located in a hazardous area. Line faults are signalled through a separate relay and indicated on the top of the module. Switches are provided to select phase reversal and to enable the line fault detection.Specification
(*) Resistors must be fitted when using the LFD facility with a contact input: 500 Ohm to 1kΩ in series with switch 20 kOhm to 25kΩ in parallel with switch (**) Note: reactive loads must be adequately suppressed. |
Relay characteristics
SIL capable
|