![Tr400 tepelné relé Tr400 tepelné relé](https://www.dacpol.eu/41557-large_default/termalni-rele-tr400.jpg)
![Tr400 tepelné relé Tr400 tepelné relé](https://www.dacpol.eu/41557-large_default/termalni-rele-tr400.jpg)
Musíte být přihlášen
Category
Montaż urządzeń
Modernizacja induktorów
Urządzenia indukcyjne
asd
Fotografie slouží pouze pro informační účely. Zobrazit specifikaci produktu
please use latin characters
Product description
The Pt 100 thermostat TR400 is a temperature controller and monitors up to 4 Pt 100 sensors at the same time. 4 switching points and 4 relays permit almost any combination of switching action. It also can select the highest temperature of a group of 3 or 4 sensors. The temperatures of two sensors or groups of sensors can be issued to 2 analog outputs i.e. for remote displays or further evaluation. Programming is very variable and simple.
Due to the fact that 4 type Pt 100 sensors can be connected, the unit is especially suitable for temperature monitoring wherever up to 4 different measuring points must be monitored simultaneously:
Overview of functions
Part number
T224380 | AC/DC 24-240 V |
---|
Technical data
Rated supply voltage Us | AC/DC 24-240 V |
---|---|
Tolerance DC | DC 20.4...297 V |
Tolerance AC | AC 20...264 V 50/60 Hz |
Power consumption | < 4 W, < 13 VA |
Sensor connection
4 sensors | Pt 100 (RTD) acc. to EN 60751 (2/3- wire) |
---|---|
Measuring range | -199°C .. 800°C, resolution = 1°C |
Resistance of sensor + wire | max. 500 Ohm |
Sensor current | ≤0,7 mA |
Measuring cycle/ time sensor | ≤ 1,5 s |
Tolerance | ±0,5 % of measured value ±1 digit |
Temperature factor | <0,04°C/K |
Analog outputs
Analog outputs | OUT 1 and OUT 2 |
---|---|
Voltage-output | DC 0/2 V – 10 V, max. DC 10 mA |
Current output | DC 0/4 mA – 20 mA |
Load | max. 500 Ω |
No-load voltage | max. DC 16 V |
Tolerance | 1% of programmed span ±1 °C |
Relay-Data K1 … K4 and K7
5 x 1 change-over contacts | |
---|---|
Switching voltage | max. AC 415 V |
Switching current | max. 5 A |
Switching capacity | max. 1250 VA (resistive load) max. 120 W at DC 24 V |
UL electrical ratings | 250 V ac, 5 A, resistive |
E214025 | 240 V ac, 1/2 hp 120 V ac, ¼ h B 300 – pilot duty, UL 508 |
Nominal operational current Ie | |
AC15 | Tj. = 3 A ...... Ue = 250 V. |
DC13 | Ie = 2 A ...... Ue = 24 V Ie = 0,2 A ...... Ue = 125 V Ie = 0,1 A ...... Ue = 250 V |
Recommended fuse NO | 4 A time-lag or miniature circuit-breaker MCB B4 |
Recommended fuse NC | 3.15 A time-lag |
Expected contact life mechanical | 3 x 107 operations |
Expected contact life electrical | 1 x 105 operations at AC 250 V / 6 A |
Test conditions (EN 61010-1)
Rated impulse voltage | 4000 V |
---|---|
Overvoltage category | III |
Contamination level | 2 |
Rated insulation voltage Ui | 300 V |
On-time | 100% |
EMC-tests (EN 61326-1)
emitted interference | EN 61000-6-3 |
---|---|
Burst | EN 61000-4-4 +/-4 kV Pulse 5/50 ns, f = 5 kHz, t = 15 ms, T = 300 ms |
SURGE | IEC 61000-4-5 +/-4 kV Impulse 1,2/50 μs (8/20 μs) |
discharge of static electricity | IEC 61000-4-2 +/-4 kV contact, +/- 8kV air |
Environmental conditions
Ambient temperature range | -20 °C ... +65 °C |
---|---|
Storage temperature range | -20 °C … +70 °C |
Altitude | Up to 2000 m |
Climatic conditions | 5 – 85 % rel. humidity, no condensation |
External wiring temperature ran | -5 °C … +70 °C |
Vibration resistance EN 60068-2-6 | 2…25 Hz ±1.6 mm 25 ... 150 Hz 5 g |
Galvanic insulation / Test-voltage | Us – Relays, sensors, USB, analog output, Reset input -> DC 3820 V Relays – sensors, USB, analog output, Reset input -> DC 3820 V |
No galvanic insulation | sensors, USB, analog output, Reset input |
Reset input Y1/Y2 | app. DC 18 V / 3,5 mA |
USB connector | Typ A, for connecting a USB stick configuration / firmware update |
Housing
Design | Wpisz V8 |
---|---|
Dimensions (H x W x D) | 140 x 90 x 58 mm |
Mounting height / Width | 55 mm / 8 TE |
Line connection solid wire | je 1 x 1,5 mm2 |
Stranded wire with isolated ferrules | je 1 x 1,0 mm2 |
Torque | 0,5 Nm (3,6 lb.in) |
Protection class housing | IP 20 |
Protection class terminals | IP 20 |
Fitting position | any |
Mounting | Snap mounting on 35 mm standard rail EN 60715 or M4 screws |
Weight | app. 360 g |
Máte zájem o tento produkt? Potřebujete další informace nebo individuální ceny?
musíš být přihlášen
Product description
The Pt 100 thermostat TR400 is a temperature controller and monitors up to 4 Pt 100 sensors at the same time. 4 switching points and 4 relays permit almost any combination of switching action. It also can select the highest temperature of a group of 3 or 4 sensors. The temperatures of two sensors or groups of sensors can be issued to 2 analog outputs i.e. for remote displays or further evaluation. Programming is very variable and simple.
Due to the fact that 4 type Pt 100 sensors can be connected, the unit is especially suitable for temperature monitoring wherever up to 4 different measuring points must be monitored simultaneously:
Overview of functions
Part number
T224380 | AC/DC 24-240 V |
---|
Technical data
Rated supply voltage Us | AC/DC 24-240 V |
---|---|
Tolerance DC | DC 20.4...297 V |
Tolerance AC | AC 20...264 V 50/60 Hz |
Power consumption | < 4 W, < 13 VA |
Sensor connection
4 sensors | Pt 100 (RTD) acc. to EN 60751 (2/3- wire) |
---|---|
Measuring range | -199°C .. 800°C, resolution = 1°C |
Resistance of sensor + wire | max. 500 Ohm |
Sensor current | ≤0,7 mA |
Measuring cycle/ time sensor | ≤ 1,5 s |
Tolerance | ±0,5 % of measured value ±1 digit |
Temperature factor | <0,04°C/K |
Analog outputs
Analog outputs | OUT 1 and OUT 2 |
---|---|
Voltage-output | DC 0/2 V – 10 V, max. DC 10 mA |
Current output | DC 0/4 mA – 20 mA |
Load | max. 500 Ω |
No-load voltage | max. DC 16 V |
Tolerance | 1% of programmed span ±1 °C |
Relay-Data K1 … K4 and K7
5 x 1 change-over contacts | |
---|---|
Switching voltage | max. AC 415 V |
Switching current | max. 5 A |
Switching capacity | max. 1250 VA (resistive load) max. 120 W at DC 24 V |
UL electrical ratings | 250 V ac, 5 A, resistive |
E214025 | 240 V ac, 1/2 hp 120 V ac, ¼ h B 300 – pilot duty, UL 508 |
Nominal operational current Ie | |
AC15 | Tj. = 3 A ...... Ue = 250 V. |
DC13 | Ie = 2 A ...... Ue = 24 V Ie = 0,2 A ...... Ue = 125 V Ie = 0,1 A ...... Ue = 250 V |
Recommended fuse NO | 4 A time-lag or miniature circuit-breaker MCB B4 |
Recommended fuse NC | 3.15 A time-lag |
Expected contact life mechanical | 3 x 107 operations |
Expected contact life electrical | 1 x 105 operations at AC 250 V / 6 A |
Test conditions (EN 61010-1)
Rated impulse voltage | 4000 V |
---|---|
Overvoltage category | III |
Contamination level | 2 |
Rated insulation voltage Ui | 300 V |
On-time | 100% |
EMC-tests (EN 61326-1)
emitted interference | EN 61000-6-3 |
---|---|
Burst | EN 61000-4-4 +/-4 kV Pulse 5/50 ns, f = 5 kHz, t = 15 ms, T = 300 ms |
SURGE | IEC 61000-4-5 +/-4 kV Impulse 1,2/50 μs (8/20 μs) |
discharge of static electricity | IEC 61000-4-2 +/-4 kV contact, +/- 8kV air |
Environmental conditions
Ambient temperature range | -20 °C ... +65 °C |
---|---|
Storage temperature range | -20 °C … +70 °C |
Altitude | Up to 2000 m |
Climatic conditions | 5 – 85 % rel. humidity, no condensation |
External wiring temperature ran | -5 °C … +70 °C |
Vibration resistance EN 60068-2-6 | 2…25 Hz ±1.6 mm 25 ... 150 Hz 5 g |
Galvanic insulation / Test-voltage | Us – Relays, sensors, USB, analog output, Reset input -> DC 3820 V Relays – sensors, USB, analog output, Reset input -> DC 3820 V |
No galvanic insulation | sensors, USB, analog output, Reset input |
Reset input Y1/Y2 | app. DC 18 V / 3,5 mA |
USB connector | Typ A, for connecting a USB stick configuration / firmware update |
Housing
Design | Wpisz V8 |
---|---|
Dimensions (H x W x D) | 140 x 90 x 58 mm |
Mounting height / Width | 55 mm / 8 TE |
Line connection solid wire | je 1 x 1,5 mm2 |
Stranded wire with isolated ferrules | je 1 x 1,0 mm2 |
Torque | 0,5 Nm (3,6 lb.in) |
Protection class housing | IP 20 |
Protection class terminals | IP 20 |
Fitting position | any |
Mounting | Snap mounting on 35 mm standard rail EN 60715 or M4 screws |
Weight | app. 360 g |
Vaše hodnocení nelze odeslat
Nahlásit komentář
Zpráva odeslána
Váš podnět nelze odeslat
Napište svůj názor
Zkontrolovat před odesláním
Vaši recenzi nelze odeslat