Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: Ambrell

Hermetische Versiegelung von Edelstahlstäben mit Glasvorformlingen

Hermetic Sealing of Stainless Steel Rods with Glass Preforms


Objective: To heat seal both ends of a stainless steel heater assembly to 300-500 ºF (149-260 ºC) and melt glass preforms.


Frequency: 212 kHz


Equipment:
  • Ambrell EASYHEATTM 2.0 kW induction heating system, equipped with a remote workhead containing two 0.66μF capacitors for a total of 1.32μF;
  • A coil specifically designed for this application.

Material: Stainless steel rods 1/2” to 3” (12.7mm to 76.2mm) diameters, glass preforms.


Temperature: 300-500 °F (149-260 °C)


Process:

A two-turn elongated helical coil is used to heat 5 to 7 stainless steel rods simultaneously for 60 seconds. The glass preforms melt and create a hermetic seal. After the first end is heated the parts are repositioned to heat the opposite end.


Benefits:
  • Hands-free heating that requires no operator skill for manufacturing;
  • Amount of glass is precisely controlled by the glass preforms and the even flow of glass creates an aesthetically pleasing bond;
  • Even distribution of heating.
Weniger
Weiterlesen

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns
FRAGEN SIE NACH DEM PRODUKT close
Vielen Dank für die Zusendung Ihrer Nachricht. Wir werden so schnell wie möglich antworten.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche
Senden Sie eine Anfrage

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

Hermetic Sealing of Stainless Steel Rods with Glass Preforms


Objective: To heat seal both ends of a stainless steel heater assembly to 300-500 ºF (149-260 ºC) and melt glass preforms.


Frequency: 212 kHz


Equipment:
  • Ambrell EASYHEATTM 2.0 kW induction heating system, equipped with a remote workhead containing two 0.66μF capacitors for a total of 1.32μF;
  • A coil specifically designed for this application.

Material: Stainless steel rods 1/2” to 3” (12.7mm to 76.2mm) diameters, glass preforms.


Temperature: 300-500 °F (149-260 °C)


Process:

A two-turn elongated helical coil is used to heat 5 to 7 stainless steel rods simultaneously for 60 seconds. The glass preforms melt and create a hermetic seal. After the first end is heated the parts are repositioned to heat the opposite end.


Benefits:
  • Hands-free heating that requires no operator skill for manufacturing;
  • Amount of glass is precisely controlled by the glass preforms and the even flow of glass creates an aesthetically pleasing bond;
  • Even distribution of heating.
Weniger
Weiterlesen
Kommentare (0)