![](https://www.dacpol.eu/26861-large_default/pr600-serie.jpg)
![](https://www.dacpol.eu/26861-large_default/pr600-serie.jpg)
Sie müssen eingeloggt sein
Category
Montaż urządzeń
Modernizacja induktorów
Urządzenia indukcyjne
asd
Fotos dienen nur zu Informationszwecken.
please use latin characters
Very good ratio Power / Volume |
Characteristics | |
---|---|
Power rating: | 600W @ 85°C Bottom case Temperature For power greater than 600W please consult Technical Dept. |
Resistance range: | from 1R0 to 1M0 |
Resistance Values: | E12 series For out of range or not std. values please contact ATE Electronics Technical Dept. |
Tolerance (Code): | Standard ±10%. Available on request up to ±1% |
Temperature coefficient: | ±150 ppm/°C |
Maximum working voltage | 5000 Vac |
Working temperature range | From -55°C to +155°C |
Dielectric Strength: | 7000 Vac (12000 Vac x PR254T) |
Insulation resistance: | > 105 MOhm at 500V |
Creep distance: | 42 mm (65 mm x PR250T) |
Air gap distance: | 16 mm (29mm x PR250T) |
Partial discharge: | < 10 pC @ 5000 Vac |
Self inductance: | 80 nH |
Parallel capacitance: | 40 pF |
Capacitance to heatsink: | < 120 pF |
Overload : | 4 Pn x 10 s |
Thermal resistance: | 0.15 °C/W |
Heatsink flatness: | 0.05 mm Max |
Heatsink surface finish: | 6.3 μm Max |
Thermal grease: | Required |
Max torque for contacts: | 2Nm (static) |
Max torque for mounting: | 2Nm (static) |
Weight: | 125 g (155 g x PR254T) |
Options: | Cable terminals PR254C / PR254TC |
Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?
Sie müssen eingeloggt sein
Very good ratio Power / Volume |
Characteristics | |
---|---|
Power rating: | 600W @ 85°C Bottom case Temperature For power greater than 600W please consult Technical Dept. |
Resistance range: | from 1R0 to 1M0 |
Resistance Values: | E12 series For out of range or not std. values please contact ATE Electronics Technical Dept. |
Tolerance (Code): | Standard ±10%. Available on request up to ±1% |
Temperature coefficient: | ±150 ppm/°C |
Maximum working voltage | 5000 Vac |
Working temperature range | From -55°C to +155°C |
Dielectric Strength: | 7000 Vac (12000 Vac x PR254T) |
Insulation resistance: | > 105 MOhm at 500V |
Creep distance: | 42 mm (65 mm x PR250T) |
Air gap distance: | 16 mm (29mm x PR250T) |
Partial discharge: | < 10 pC @ 5000 Vac |
Self inductance: | 80 nH |
Parallel capacitance: | 40 pF |
Capacitance to heatsink: | < 120 pF |
Overload : | 4 Pn x 10 s |
Thermal resistance: | 0.15 °C/W |
Heatsink flatness: | 0.05 mm Max |
Heatsink surface finish: | 6.3 μm Max |
Thermal grease: | Required |
Max torque for contacts: | 2Nm (static) |
Max torque for mounting: | 2Nm (static) |
Weight: | 125 g (155 g x PR254T) |
Options: | Cable terminals PR254C / PR254TC |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Eigenen Kommentar verfassen
Review sent
Your review cannot be sent