Anaerobic adhesives

1. Greenmark®

2. Comparison of our thread locking agents

2.1 Technical data

3. B222 Eco – Low-strength thread locking agent

3.1 Overview

3.2 Technical data

3.3 Application information

4. B243 Eco – Medium-strength thread locking agent

4.1 Overview

4.2 Technical data

4.3 Application information

5. B270 Eco - High-strength thread locking agent

5.1 Overview

5.2 Technical data

5.3 Application information

6. Disclaimer

1. Greenmark®

The Greenmark® sub-brand includes all marking systems of Lackfabrik Bäder GmbH & Co. KG that are not hazardous substances and have a particularly mild impact on people and the environment. This is the result of Bäder® company's strategic decision to largely rely on high-performance water-based marking systems for new solutions and thereby significantly improve the ecological footprint. Zero scope marks the beginning and will be complemented by further high-performance systems this year and next year.

• Properties of all Greenmark® products
• No HAP
• No hazardous goods
• Isolation
• Good resistance to media

2. Comparison of our thread locking agents

2.1 Technical data

* At a temperature of 25°C, using a Brookfield viscometer.
** Measured according to DIN 53217, part 2, Density ball model 475/III.
*** Measured according to DIN 51755.

3. B222 Eco - Low-Strength Thread Locking Agent

3.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and catalytic action of metal (contact with metal). B222 Eco seals and locks various types of screws and connections.

Properties

• Rapid curing on a wide range of ferrous metals
• High vibration resistance
• Securely locked screws, easy to disassemble using tools
• High compatibility with oils

Compared to conventional anaerobic adhesives, Bäder® Greenmark® products are completely label-free. In addition, they offer an extended shelf life of 24 months instead of 12 months to the user, improved storage stability, and increased temperature resistance in use up to +180°C.
Available containers and maximum screw sizes.

Colors and item numbers

Color		RAL	Part NO
	Purple, fluorescent	-	#73300

3.2 Technical Data

Uncured Product

* At a temperature of 25°C, using a Brookfield viscometer.
** Measured according to DIN 53217, part 2, Density ball model 475/III.
*** Measured according to DIN 51755

Cured Product

Curing Properties

Storage and Durability

The shelf life is 24 months at the optimal storage temperature ranging from 5°C to 23°C in a tightly closed, original container. Storage at a higher temperature leads to a significantly shorter shelf life. The storage temperature must not drop below 5°C.

3.3 Application Information

Low-strength thread locking agents are not suitable for: Metal-plastic, flange connections, areas where open oxygen is used, and sealing against media with strongly oxidizing acids. The product can only be applied on standard metal threads. The secured surface must be free of grease and completely clean. Then, use the thread locking agent to completely fill the gap between the two parts, assemble the parts, and seal them completely. Insufficient sealing may lead to leakage over time. Do not move parts after the hardening process has begun. Leave the adhesive to fully cure for 24 hours before use. In mass production, it is advisable to lock or secure the bonding using a pipe wrench to avoid disrupting the layer during the hardening process. Please refer to the safety data sheet before using the product.

4. B243 Eco - Medium-Strength Thread Locking Agent

4.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and catalytic action of metal (contact with metal). B243 Eco, of medium strength, seals and locks various types of screws and connections.

Properties

• DVGW certification (DIN EN 751-1 class H)
• Rapid curing on a wide range of ferrous metals
• High vibration resistance
• Screws secured, moderately difficult to disassemble using tools
• Increased compatibility with oils

Compared to conventional anaerobic adhesives, Bäder® Greenmark® products are completely label-free. In addition, they offer an extended shelf life of 24 months instead of 12 months to the user, improved storage stability, and increased temperature resistance in use up to +180°C.
Available containers and maximum screw sizes.

Available containers and maximum screw sizes

Colors and item numbers

Color		RAL	Part NO
	Blue, fluorescent	-	#12000

4.2 Technical Data

*At a temperature of 25°C, using a Brookfield viscometer.
** Measured according to DIN 53217, part 2, Density ball model 475/III.
*** Measured according to DIN51755

Cured Product

Curing Properties

Storage and Durability

The shelf life is 24 months at the optimal storage temperature ranging from 5°C to 23°C in a tightly closed, original container. Storage at a higher temperature leads to a significantly shorter shelf life. The storage temperature must not drop below 5°C.

4.3 Application Information

Medium-strength thread locking agents are not suitable for: Metal-plastic flange connections, areas where open oxygen is used, and sealing against media with strongly oxidizing acids. The product can only be applied on standard metal threads. The secured surface must be free of grease and completely clean. Then, use the thread locking agent to completely fill the gap between the two parts, assemble the parts, and seal them completely. Insufficient sealing may lead to leakage. Do not move parts after the hardening process has begun.

Leave the adhesive to fully cure for 24 hours before use. In mass production, it is advisable to lock or secure the bonding using a pipe wrench to avoid disrupting the layer during the hardening process. Please refer to the safety data sheet before using the product.

5. B270 Eco - High-Strength Thread Locking Agent

5.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and catalytic action of metal (contact with metal). B270 Eco seals and locks various types of screws and connections.

Properties

Screw fixation in the delivery state, even with slight contamination. Fixing of double-sided screws, as well as ball and roller bearings that do not need to be loosened. Particularly suitable for heavily loaded screw connections. Compared to conventional anaerobic adhesives, Bäder® Greenmark® products are completely label-free. In addition, they offer an extended shelf life of 24 months instead of 12 months to the user, improved storage stability, and increased temperature resistance in use up to +180°C.

Available containers and maximum screw sizes

Colors and item numbers

Color		RAL	Part No.
	Green, fluorescent	-	#75000

5.2 Technical Data

Uncured Product

* At a temperature of 25°C, using a Brookfield viscometer.
** Measured according to DIN 53217, part 2, Density ball model 475/III.
*** Measured according to DIN51755

Cured Product

Curing Properties

Storage and Durability

The shelf life is 24 months at the optimal storage temperature ranging from 5°C to 23°C in a tightly closed, original container. Storage at a higher temperature leads to a significantly shorter shelf life. The storage temperature must not drop below 5°C.

5.3 Application Information

High-strength thread locking agents are not suitable for: Metal-plastic flange connections, areas where gaseous oxygen is used, and sealing against media with strongly oxidizing acids.

The product can only be applied on standard metal threads. The secured surface must be free of grease and completely clean. Then, use the thread locking agent to completely fill the gap between the two parts, assemble the parts, and seal them completely. Insufficient sealing may lead to leakage. Do not move parts after the hardening process has begun.

Leave the adhesive to fully cure for 24 hours before use. In mass production, it is advisable to lock or secure the bonding using a pipe wrench to avoid disrupting the layer during the hardening process. Please refer to the safety data sheet before using the product.

6. Disclaimer

The information provided in this technical data sheet (TDS) and detailed suggestions regarding the processing and application scope of our products are based on our current knowledge and experience. Due to various application possibilities and working conditions beyond our control, we do not assume any responsibility for the suitability of our products for specific purposes, production processes in certain working conditions, as well as intended processing purposes and results. To ensure such suitability, we recommend conducting tests and trials before final application.

Any liability arising from the instructions in these technical data sheets and any other written or oral advice regarding the presented product is excluded, unless otherwise agreed in an individual agreement, in case of endangering life or health, in the case of intentional acts or gross negligence on our part, or in the case of liability under mandatory product liability regulations.

The data contained in this document is for informational purposes only and is considered reliable to the best of our knowledge. However, we cannot accept responsibility for results obtained by others over whom we have no control over the methods used. It is the user's responsibility to determine the suitability of any listed production methods herein for their purposes and to take all necessary precautions to secure property and persons from hazards associated with the handling and use of these products. Therefore, Lackfabrik Bäder GmbH & Co. KG expressly disclaims any warranty, express or implied, arising from the sale or use of products manufactured by Lackfabrik Bäder GmbH & Co. KG, including any warranties and guarantees of fitness for a particular purpose. In particular, Lackfabrik Bäder GmbH & Co. KG disclaims any liability for consequential or indirect damages of any kind, including lost profits.