Tachometer with an impulse input ETS1410
  • Tachometer with an impulse input ETS1410

Photos are for informational purposes only. View product specification

please use latin characters

Manufacturer: Sisel

Tachometer with an impulse input ETS1410

* 35x77 sized.
* Easy to use.
* Decimal point can be adjusted..
* Process value can be devided by a value
between 1 and 999.
* Sampling time is selected automatically
according to input frequency. Sampling time is
between 1 and 16s.
* CE marked according to European Norms.

Technical data
- Ambient/storage temperature
0 ... +50°C/-25 ... +70°C (with no icing)
- Max. relative humidity
80% (temp. <31°C)
- Rated pollution degree
According to EN 60529 Front panel : IP65
Rear panel : IP20
- Height
max 2000m

Do not use the device in locations subject to corrosive and flammable gasses.

Technical data:
- Supply voltage
230V AC +10% -20% or 24V AC ±10%, 50/60Hz or optional 9-30V DC / 7-24V AC ±10% SMPS module
- Power consumption
<2VA
- Wiring
2.5mm² screw terminal connection
- Display
4 digits, 9.1mm, 7 segment red display LED.
- Accuracy
0,01%
- EMC
EN 61326-1:1997, Al: 1998, A2: 2001
- Safety requirements
 EN 61010-1: 2001 (pollution degree 2, over voltage category II, measurement category I) ETS1410 must not be used in location where measurement category is II, III or IV.
INPUTS:
- Sensor input
5...30V pulse
- Measurement frequency
0,07...3000 Hz
- Sampling time
Automatically adjusted according to input frequency. Minimum: 1s, Maximum: 16s
OUTPUT
- Auxiliary supply output
12V DC, Max. 30mA (unregulated)
   
HOUSING
-Housing type
Suitable for flush-panel mounting.
-Dimensions
34x77x70mm
-Weight
200g
-Enclosure material
Self extinguishing plastics

While cleaning the device, solvents (thinner, benzine, acid etc.) or corrosive materials must not be used.
Type Power supply
ETS 1410 230V AC
ETS1410 -SM 9-30VDC / 7-24VAC

Dimensioms:



Connection scheme
Less
Read more

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us
ASK FOR THE PRODUCT close
Thank you for sending your message. We will respond as soon as possible.
ASK FOR THE PRODUCT close
Browse
send an inquiry

Add to Wishlist

You must be logged in

* 35x77 sized.
* Easy to use.
* Decimal point can be adjusted..
* Process value can be devided by a value
between 1 and 999.
* Sampling time is selected automatically
according to input frequency. Sampling time is
between 1 and 16s.
* CE marked according to European Norms.

Technical data
- Ambient/storage temperature
0 ... +50°C/-25 ... +70°C (with no icing)
- Max. relative humidity
80% (temp. <31°C)
- Rated pollution degree
According to EN 60529 Front panel : IP65
Rear panel : IP20
- Height
max 2000m

Do not use the device in locations subject to corrosive and flammable gasses.

Technical data:
- Supply voltage
230V AC +10% -20% or 24V AC ±10%, 50/60Hz or optional 9-30V DC / 7-24V AC ±10% SMPS module
- Power consumption
<2VA
- Wiring
2.5mm² screw terminal connection
- Display
4 digits, 9.1mm, 7 segment red display LED.
- Accuracy
0,01%
- EMC
EN 61326-1:1997, Al: 1998, A2: 2001
- Safety requirements
 EN 61010-1: 2001 (pollution degree 2, over voltage category II, measurement category I) ETS1410 must not be used in location where measurement category is II, III or IV.
INPUTS:
- Sensor input
5...30V pulse
- Measurement frequency
0,07...3000 Hz
- Sampling time
Automatically adjusted according to input frequency. Minimum: 1s, Maximum: 16s
OUTPUT
- Auxiliary supply output
12V DC, Max. 30mA (unregulated)
   
HOUSING
-Housing type
Suitable for flush-panel mounting.
-Dimensions
34x77x70mm
-Weight
200g
-Enclosure material
Self extinguishing plastics

While cleaning the device, solvents (thinner, benzine, acid etc.) or corrosive materials must not be used.
Type Power supply
ETS 1410 230V AC
ETS1410 -SM 9-30VDC / 7-24VAC

Dimensioms:



Connection scheme
Less
Read more
Comments (0)