

Category
Photos are for informational purposes only. View product specification
please use latin characters
Standard films are flexible and consist of a silicone elastomer, filled with various thermoconductive ceramic materials. All film types are electrically insulating. For increased mechanical strength, the films are also available with fibreglass reinforcement. The standard films adapt to the component surface. Small irregularities can be evened out by using only minimal contact pressures. The good thermal properties of these films guarantee optimum heat transfer to the heat sink and at the same time achieving good electrical insulation properties. |
![]() |
Product features
|
Packaging Sheets: 450 x 250 mm
|
Material | Thermal conductivity | Thermal resistance | Breakdown voltage | Thickness** | Hardness | |
---|---|---|---|---|---|---|
W/mK | K/W | kV | mm | Shore A | ||
86/82 | Red with fibreglass reinforcement | 6.5 | 0.09 | 1.0 | 0.25, 0.3 | 60-70 |
86/60 | Pink | 4.5 | 0.14 | 5.0 | 0.15, 0.25, 0.5 | 45-60 |
86/60 | Pink | 4.5 | 0.14 | 5.0 | 0.15, 0.25, 0.5 | 45-60 |
86/50 | Pink | 3.5 | 0.16 | 1.5 | 0.125, 0.225, 0.325, 0.425, 0.5 | 70-80 |
86/30 | White | 2.5 | 0.22 | 1.5 | 0.125, 0.225, 0.325, 0.425, 0.5 | 70-80 |
86/37 | Green | 1.8 | 0.32 | 8.0 | 0.125, 0.225, 0.325, 0.425, 0.5 | 65-75 |
70/50 | Brown with fibreglass reinforcement | 1.4 | 0.44 | 5.0 | 0.25, 0.3, 0.35, 0.4, 0.5 | 80-90 |
U90 | Silicone free | 6.0 | 0.08* | 4.0 | 0.1, 0.2, 0.3 | 70-85 |
U85 | Silicone free | 3.0 | 0.17* | 6.0 | 0.2 | 70-85 |
U80 | Silicone free | 1.8 | 0.20 | 4.0 | 0.15, 0.3 | 80-90 |
MT 103 | Elastomer | 1.8 | 0.39 | 10.0 | 0.28 | 70-85 |
MT 102 | Elastomer | 1.1 | 0.53 | 10.0 | 0.25 | 65-75 |
(*) Rounded values.
(**) Parameters for bolded values.
Are you interested in this product? Do you need additional information or individual pricing?
Standard films are flexible and consist of a silicone elastomer, filled with various thermoconductive ceramic materials. All film types are electrically insulating. For increased mechanical strength, the films are also available with fibreglass reinforcement. The standard films adapt to the component surface. Small irregularities can be evened out by using only minimal contact pressures. The good thermal properties of these films guarantee optimum heat transfer to the heat sink and at the same time achieving good electrical insulation properties. |
![]() |
Product features
|
Packaging Sheets: 450 x 250 mm
|
Material | Thermal conductivity | Thermal resistance | Breakdown voltage | Thickness** | Hardness | |
---|---|---|---|---|---|---|
W/mK | K/W | kV | mm | Shore A | ||
86/82 | Red with fibreglass reinforcement | 6.5 | 0.09 | 1.0 | 0.25, 0.3 | 60-70 |
86/60 | Pink | 4.5 | 0.14 | 5.0 | 0.15, 0.25, 0.5 | 45-60 |
86/60 | Pink | 4.5 | 0.14 | 5.0 | 0.15, 0.25, 0.5 | 45-60 |
86/50 | Pink | 3.5 | 0.16 | 1.5 | 0.125, 0.225, 0.325, 0.425, 0.5 | 70-80 |
86/30 | White | 2.5 | 0.22 | 1.5 | 0.125, 0.225, 0.325, 0.425, 0.5 | 70-80 |
86/37 | Green | 1.8 | 0.32 | 8.0 | 0.125, 0.225, 0.325, 0.425, 0.5 | 65-75 |
70/50 | Brown with fibreglass reinforcement | 1.4 | 0.44 | 5.0 | 0.25, 0.3, 0.35, 0.4, 0.5 | 80-90 |
U90 | Silicone free | 6.0 | 0.08* | 4.0 | 0.1, 0.2, 0.3 | 70-85 |
U85 | Silicone free | 3.0 | 0.17* | 6.0 | 0.2 | 70-85 |
U80 | Silicone free | 1.8 | 0.20 | 4.0 | 0.15, 0.3 | 80-90 |
MT 103 | Elastomer | 1.8 | 0.39 | 10.0 | 0.28 | 70-85 |
MT 102 | Elastomer | 1.1 | 0.53 | 10.0 | 0.25 | 65-75 |
(*) Rounded values.
(**) Parameters for bolded values.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent