Serpientes no conductores - Manguera eléctrica azul / negro
  • Serpientes no conductores - Manguera eléctrica azul / negro

Las fotos son solo para fines informativos. Ver especificaciones de producto

please use latin characters

Fabricante: Lippmann

Serpientes no conductores - Manguera eléctrica azul / negro

ELECTRIC HOSE BLUE/BLACK

Properties

  • non-conductive cooling water hose for use in Inverters / Rectifiers and for water cooled cables
  • Due to the hose construction and the thin wall-thicknesses, a tight bending radius is possible here – without kinking or flattening.
  • Working pressures: 10 bar, Burst pressure > 30 bar
  • Temperature range: : – 40°C up to +100°C
  • Electrical resistance: R>10¹¹ Ohm pro Meter
  • Roll length = 40 m
Material
  • Cover: EPDM, blue, non-conductive
  • Reinforcement: technical fibre
  • Lining: EPDM, black, non-conductive
Areas of Application
  • Cooling water hoses or for water cooled cables
  • Inverter and Rectifier
  • Thyristors
  • Inductive Bar Heater
Available Sizes:
DN 10 x 3,5 mm DN 13 x 3,5 mm DN 19 x 4,5 mm DN 25 x 5,0 mm DN 32 x 5,0 mm

Envíe una consulta

¿Estás interesado en este producto? ¿Necesita información adicional o precios individuales?

Contacta con nosotras
SOLICITA EL PRODUCTO close
Gracias por enviar tu mensaje. Responderemos lo antes posible.
SOLICITA EL PRODUCTO close
Vistazo

Añadir a la lista de deseos

Usted debe estar conectado

ELECTRIC HOSE BLUE/BLACK

Properties

  • non-conductive cooling water hose for use in Inverters / Rectifiers and for water cooled cables
  • Due to the hose construction and the thin wall-thicknesses, a tight bending radius is possible here – without kinking or flattening.
  • Working pressures: 10 bar, Burst pressure > 30 bar
  • Temperature range: : – 40°C up to +100°C
  • Electrical resistance: R>10¹¹ Ohm pro Meter
  • Roll length = 40 m
Material
  • Cover: EPDM, blue, non-conductive
  • Reinforcement: technical fibre
  • Lining: EPDM, black, non-conductive
Areas of Application
  • Cooling water hoses or for water cooled cables
  • Inverter and Rectifier
  • Thyristors
  • Inductive Bar Heater
Available Sizes:
DN 10 x 3,5 mm DN 13 x 3,5 mm DN 19 x 4,5 mm DN 25 x 5,0 mm DN 32 x 5,0 mm
Comentarios (0)