MLA-015 Actuadores Eléctricos
  • MLA-015 Actuadores Eléctricos

Las fotos son solo para fines informativos. Ver especificaciones de producto

please use latin characters

Fabricante: GINICE KOREA

MLA-015 Actuadores Eléctricos


Features:

  • Direct coupled installation without tools
  • Compact size allows installation in limited space
  • Modulating control
  • No mounting tools required
  • Manual override with hexagonal wrench 4 mm
  • Visual position indication
  • Ready-to-wire connecting cable (1.5m cable)
  • Receives 0-10VDC or 2-10VDC input signal, selectable at the site
  • Valve is closed automatically in case input signal is removed or failed.
  • Self-calibration function : Actuator run a self-calibration automatically once a day. It is used to prevent the valve sticking when the valve is not used for a long time while the power is on. Selected by dip switch


Technical data

Supplying power 24VAC ± 10% (50/60Hz), 24VDC or 12VAC/DC
Power consumption Operation : 2.7W / Stand-by : 1.3W
Rated force 150N 
Operating time 15sec/mm 
Stroke 6.5mm 
In/Output signal 0(2)-10VDC 
Enclosure IP54 
Ambient temperature 0 ~ +50℃
Lead wire 1.5M (3.0M as option)
Materials PC 
Connection to valve Coupling nut M30X1.5
Weight 0.23Kg 
Menos
Lee mas

Envíe una consulta

¿Estás interesado en este producto? ¿Necesita información adicional o precios individuales?

Contacta con nosotras
SOLICITA EL PRODUCTO close
Gracias por enviar tu mensaje. Responderemos lo antes posible.
SOLICITA EL PRODUCTO close
Vistazo
enviar una consulta

Añadir a la lista de deseos

Usted debe estar conectado


Features:

  • Direct coupled installation without tools
  • Compact size allows installation in limited space
  • Modulating control
  • No mounting tools required
  • Manual override with hexagonal wrench 4 mm
  • Visual position indication
  • Ready-to-wire connecting cable (1.5m cable)
  • Receives 0-10VDC or 2-10VDC input signal, selectable at the site
  • Valve is closed automatically in case input signal is removed or failed.
  • Self-calibration function : Actuator run a self-calibration automatically once a day. It is used to prevent the valve sticking when the valve is not used for a long time while the power is on. Selected by dip switch


Technical data

Supplying power 24VAC ± 10% (50/60Hz), 24VDC or 12VAC/DC
Power consumption Operation : 2.7W / Stand-by : 1.3W
Rated force 150N 
Operating time 15sec/mm 
Stroke 6.5mm 
In/Output signal 0(2)-10VDC 
Enclosure IP54 
Ambient temperature 0 ~ +50℃
Lead wire 1.5M (3.0M as option)
Materials PC 
Connection to valve Coupling nut M30X1.5
Weight 0.23Kg 
Menos
Lee mas
Comentarios (0)