Vernis polyester Insaturé P721, polymérisation dans la sécheuse
  • Vernis polyester Insaturé P721, polymérisation dans la sécheuse

Les photos sont à titre informatif uniquement. Voir les spécifications du produit

please use latin characters

Fabricant: SEG

Vernis polyester Insaturé P721, polymérisation dans la sécheuse

One component - for insulation class H 180°C.

Application:
-static and whirling electro technical material

Main characteristic:
  LacquerP721:
- it is a non saturated polyester resin with reactive one component monomer.
- it is in liquid condensation, as one component.
- it is easy to use
- it has good thermal resistance

Material impregnation:
By immersion, vacuum.

Polymerisation:
It is not necessary to remove diluent. Polymerization lasts 4 hour at 150C temperature.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing:
Containers 1-5, 30 and 200 l

Hygiene and protection:
It doesn't contain styrene.

Lacquer Standard P721
Chemical origins   Non saturated polyester
thermal class IEC216 [H] 180°C
viscosity 23°C CPE 6: ISO 2431 60 s
density @ 23°C NSEG 00 500 mPas
density @ 20°C NFT 30020 1.102
  [ISO 2811] >61°C
Colour:   natural[transparent yellow]
Gelation time 121°C± 1°C NSEG 0012 8 min. ± 1 min 30 s
Polymerisation   4 h. @ 150°C
sintering[ after polymerisation 4H/150°C] CEI 1033screw twist [helical coil]CEI 455 20°C>10daNprzy 180°C>2daN
Break down voltage [after polymerisation 4H/150°C]   500V
     
     
Moins
Lire la suite

Envoyez une demande

Êtes-vous intéressé par ce produit? Avez-vous besoin d'informations supplémentaires ou d'une tarification individuelle?

Nous contacter
DEMANDEZ LE PRODUIT close
Merci d'avoir envoyé votre message. Nous vous répondrons dans les plus brefs délais.
DEMANDEZ LE PRODUIT close
Feuilleter
envoyer une demande

Ajouter à la liste de souhaits

Vous devez être connecté

One component - for insulation class H 180°C.

Application:
-static and whirling electro technical material

Main characteristic:
  LacquerP721:
- it is a non saturated polyester resin with reactive one component monomer.
- it is in liquid condensation, as one component.
- it is easy to use
- it has good thermal resistance

Material impregnation:
By immersion, vacuum.

Polymerisation:
It is not necessary to remove diluent. Polymerization lasts 4 hour at 150C temperature.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing:
Containers 1-5, 30 and 200 l

Hygiene and protection:
It doesn't contain styrene.

Lacquer Standard P721
Chemical origins   Non saturated polyester
thermal class IEC216 [H] 180°C
viscosity 23°C CPE 6: ISO 2431 60 s
density @ 23°C NSEG 00 500 mPas
density @ 20°C NFT 30020 1.102
  [ISO 2811] >61°C
Colour:   natural[transparent yellow]
Gelation time 121°C± 1°C NSEG 0012 8 min. ± 1 min 30 s
Polymerisation   4 h. @ 150°C
sintering[ after polymerisation 4H/150°C] CEI 1033screw twist [helical coil]CEI 455 20°C>10daNprzy 180°C>2daN
Break down voltage [after polymerisation 4H/150°C]   500V
     
     
Moins
Lire la suite
Commentaires (0)