SC1400
  • SC1400

A fényképek csak tájékoztató jellegűek. Lásd a termék specifikációit

Kérjük, használjon latin karaktereket

Gyártó: FineTek

SC1400

The SC series consists of vibration level sensors with tuning fork elements that use piezoelectric crystals and semiconductor electronics technology to generate vibrations in the tuning fork element at a specific frequency and receive electronic feedback. When the probe element makes contact with the target material, the vibrations are dampened, and the electronic feedback changes, with the presence of the material being detected by the electronics, which changes the sensor output state, indicating the presence of the material. When the probe element no longer makes contact with the target material, vibrations are generated again, and the output state returns to indicating the absence of the material.

Main features:

  • Double insulation reduces PCB damage caused by large temperature changes.
  • Suitable for liquid, bulk, and solid applications.
  • Sensitivity adjustment available for different material densities. Capable of detecting fine powder.
  • No frequent calibration required, easy to use, robust and durable construction.
  • SPDT relay output, SSR MOSFET output.
  • Wide power supply voltage range 20~250 V AC/DC, 50/60Hz.

Applications:

The device is used for detecting the maximum and minimum levels of tanks or pipes filled with various solid/liquid materials. Examples of substances that can be monitored:

  • Bulk materials:
    • Powdered milk
    • Sugar
    • Tea
    • Salt
    • Gravel
  • Liquids:
    • Water
    • General-purpose solvent
    • Heavy oil
    • Petroleum
    • Ink

Industries where sensors can be used:

  • Chemical fibers industry
  • Cement industry
  • Steel industry
  • Food industry
  • Pharmaceutical industry

Technical Data:

Dimensions [mm] SC1400 Standard SC1410 Extra Long Forks SC1420 Long Forks
Model SC1400 Standard SC1410 with Extra Long Tuning Forks SC1420 with Long Tuning Forks
Level Sensor Housing Aluminum / IP65
Sensor Material SUS 304 / 316 / 316L
Mounting 1”PT
Connector ½”NPT x 2
Maximum Vertical Rod Load 20Nm
Process Pressure 40 bar
Power Supply Voltage 20…250V AC/DC 50/60Hz
Power Consumption 10VA
Ambient Temperature -40…60°C
Process Temperature -40…130°C
Output Signal Relay, SPDT, 5A/250V AC, 1 or 2 sets of SSR (MOSFET) 400mA/60V AC/DC, 1 or 2 sets
Minimum Detectable Material Density Solid: ≥0.07g/cm³, Liquid: ≥0.7g/cm³
Time Delay 0.6s / Operation; 1-3s / Reset
Vibration Frequency 350-370Hz
Selectable Sensitivity High / Low

Kevésbé
Olvass tovább

Ajánlatkérés küldése

Érdekel ez a termék? További információra vagy egyedi árajánlatra van szüksége?

Lépjen kapcsolatba velünk
Kérdezzen a termékről close
Köszönjük az üzenetét Amint lehet, válaszolunk
Kérdezzen a termékről close
Böngésszen
Kérelem beküldése

Add to wishlist

Musisz być zalogowany/a

The SC series consists of vibration level sensors with tuning fork elements that use piezoelectric crystals and semiconductor electronics technology to generate vibrations in the tuning fork element at a specific frequency and receive electronic feedback. When the probe element makes contact with the target material, the vibrations are dampened, and the electronic feedback changes, with the presence of the material being detected by the electronics, which changes the sensor output state, indicating the presence of the material. When the probe element no longer makes contact with the target material, vibrations are generated again, and the output state returns to indicating the absence of the material.

Main features:

  • Double insulation reduces PCB damage caused by large temperature changes.
  • Suitable for liquid, bulk, and solid applications.
  • Sensitivity adjustment available for different material densities. Capable of detecting fine powder.
  • No frequent calibration required, easy to use, robust and durable construction.
  • SPDT relay output, SSR MOSFET output.
  • Wide power supply voltage range 20~250 V AC/DC, 50/60Hz.

Applications:

The device is used for detecting the maximum and minimum levels of tanks or pipes filled with various solid/liquid materials. Examples of substances that can be monitored:

  • Bulk materials:
    • Powdered milk
    • Sugar
    • Tea
    • Salt
    • Gravel
  • Liquids:
    • Water
    • General-purpose solvent
    • Heavy oil
    • Petroleum
    • Ink

Industries where sensors can be used:

  • Chemical fibers industry
  • Cement industry
  • Steel industry
  • Food industry
  • Pharmaceutical industry

Technical Data:

Dimensions [mm] SC1400 Standard SC1410 Extra Long Forks SC1420 Long Forks
Model SC1400 Standard SC1410 with Extra Long Tuning Forks SC1420 with Long Tuning Forks
Level Sensor Housing Aluminum / IP65
Sensor Material SUS 304 / 316 / 316L
Mounting 1”PT
Connector ½”NPT x 2
Maximum Vertical Rod Load 20Nm
Process Pressure 40 bar
Power Supply Voltage 20…250V AC/DC 50/60Hz
Power Consumption 10VA
Ambient Temperature -40…60°C
Process Temperature -40…130°C
Output Signal Relay, SPDT, 5A/250V AC, 1 or 2 sets of SSR (MOSFET) 400mA/60V AC/DC, 1 or 2 sets
Minimum Detectable Material Density Solid: ≥0.07g/cm³, Liquid: ≥0.7g/cm³
Time Delay 0.6s / Operation; 1-3s / Reset
Vibration Frequency 350-370Hz
Selectable Sensitivity High / Low

Kevésbé
Olvass tovább
Hozzászólások (0)