Kaklelio atkaitinimas aliuminio kriogeniniame dewar'e
  • Kaklelio atkaitinimas aliuminio kriogeniniame dewar'e

Nuotraukos yra skirtos tik informaciniams tikslams. Peržiūrėkite produkto specifikaciją

please use latin characters

Gamintojas: Ambrell

Kaklelio atkaitinimas aliuminio kriogeniniame dewar'e

Annealing lip on aluminum cryogenic dewar


Objective: Annealing a 1” lip on aluminum cryogenic dewar* that has been work hardened during the process of spin forming.


Frequency: 303 kHz


Equipment:
  • Ambrell 3.5 kW induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor;
  • An induction heating coil designed and developed specifically for this application.

Material: Aluminum dewar, lip has a 3.24” (82.3mm) ID and is 0.05” (1.3mm) thick.


Temperature: 800 °F (427 °C)


Process:

A two turn helical coil is used to heat the lip on the cryogenic dewar. The dewar is placed in the coil and power is applied for 2 minutes to anneal the required 1” heat zone.


Benefits:
  • Hands-free heating that involves no operator skill for manufacturing;
  • Fast, controllable, accurate heating;
  • High efficiency, low energy cost;
  • Even distribution of heating;

* dewar is a glass or metal container for storing liquefied gases
mažiau
Skaityk daugiau

Atsiųskite užklausą

Ar Jūs domina šis produktas? Ar Jums reikia papildomos informacijos ar individualaus pasiūlymo?

Susisiekite su mumis
KLAUSKITE PRODUKTO close
Dėkojame, kad atsiuntėte žinutę. Atsakysime kuo greičiau.
KLAUSKITE PRODUKTO close
Naršyti
atsiųsti paklausimą

Pridėti į norų sąrašą

tu turi būti prisijungęs

Annealing lip on aluminum cryogenic dewar


Objective: Annealing a 1” lip on aluminum cryogenic dewar* that has been work hardened during the process of spin forming.


Frequency: 303 kHz


Equipment:
  • Ambrell 3.5 kW induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor;
  • An induction heating coil designed and developed specifically for this application.

Material: Aluminum dewar, lip has a 3.24” (82.3mm) ID and is 0.05” (1.3mm) thick.


Temperature: 800 °F (427 °C)


Process:

A two turn helical coil is used to heat the lip on the cryogenic dewar. The dewar is placed in the coil and power is applied for 2 minutes to anneal the required 1” heat zone.


Benefits:
  • Hands-free heating that involves no operator skill for manufacturing;
  • Fast, controllable, accurate heating;
  • High efficiency, low energy cost;
  • Even distribution of heating;

* dewar is a glass or metal container for storing liquefied gases
mažiau
Skaityk daugiau
Komentarai (0)