![Ajustarea prin contracție a unui angrenaj din oțel pe arborele motorului Ajustarea prin contracție a unui angrenaj din oțel pe arborele motorului](https://www.dacpol.eu/20258-large_default/ajustarea-prin-contracie-a-unui-angrenaj-din-oel-pe-arborele-motorului.jpg)
![Ajustarea prin contracție a unui angrenaj din oțel pe arborele motorului Ajustarea prin contracție a unui angrenaj din oțel pe arborele motorului](https://www.dacpol.eu/20258-large_default/ajustarea-prin-contracie-a-unui-angrenaj-din-oel-pe-arborele-motorului.jpg)
trebuie să fii logat
Category
Montaż urządzeń
Modernizacja induktorów
Urządzenia indukcyjne
asd
Fotografiile au doar scop informativ. Vizualizați specificațiile produsului
please use latin characters
Objective: Heat the bore of a hardened spur steel gear to shrink fit onto a gear motor shaft. This is part of a chair for the disabled.
Frequency: 300 kHz
Equipment:
Material: Steel gear 2.5” (63.5mm) OD, .75” (19mm) ID x .625” (16mm) thick, temperature indicating paint
Temperature: 400 ºF (204 ºC)
Process:
A four turn helical internal coil is used to heat the gear bore. The coil is inserted into the gear bore and power is applied for 90 seconds to reach the required 400 ºF (204 ºC) and expand the gear bore. The gear is then placed on the shaft and allowed to cool, creating the shrink fit between the gear and the shaft.
Benefits:
Sunteți interesat de acest produs? Aveți nevoie de informații suplimentare sau de prețuri individuale?
trebuie să fii logat
Objective: Heat the bore of a hardened spur steel gear to shrink fit onto a gear motor shaft. This is part of a chair for the disabled.
Frequency: 300 kHz
Equipment:
Material: Steel gear 2.5” (63.5mm) OD, .75” (19mm) ID x .625” (16mm) thick, temperature indicating paint
Temperature: 400 ºF (204 ºC)
Process:
A four turn helical internal coil is used to heat the gear bore. The coil is inserted into the gear bore and power is applied for 90 seconds to reach the required 400 ºF (204 ºC) and expand the gear bore. The gear is then placed on the shaft and allowed to cool, creating the shrink fit between the gear and the shaft.
Benefits:
Aprecierea ta pentru recenzie nu a putut fi trimisa
Reclama un comentariu
Raport trimis
Reclamatia tau nu a putut fi trimisa
Scrie-ti recenzia
Recenzia a fost trimisa
Recenzia ta nu a putut fi trimisa