Formarea unei piese din oțel magnetic
  • Formarea unei piese din oțel magnetic

Fotografiile au doar scop informativ. Vizualizați specificațiile produsului

please use latin characters

Producător: Ambrell

Formarea unei piese din oțel magnetic

Forming a Magnetic Steel Part


Objective: To heat a magnetic steel part for a forming application; the client had been using a torch for the application.


Frequency: 125 kHz


Equipment:
  • Ambrell EKOHEAT® 15 kW, 50-150 kHz induction heating system equipped with a remote workhead;
  • A single position multiple-turn helical coil designed specifically for this application.

Material: Magnetic steel part


Temperature: 1700 °F (927 °C)


Process:

Temperature indicating paint was applied to the part to easily identify when it achieved temperature, and then the induction power was turned on. It took about three minutes for the part to reach 1700 °F (927 °C) at 10 kW and two minutes and twenty seconds with 15 kW for this through-Curie heating application.


Benefits:
  • Speed: Induction heated the part to forming temperature more rapidly than a torch;
  • Precise, repeatable heating: Induction can target the precise portion of the part that requires heating every time;
  • Safety: An open flame creates safety concerns, whereas induction is a comparatively safe heating method;
mai puțin
Citeste mai mult

Trimite o cerere

Sunteți interesat de acest produs? Aveți nevoie de informații suplimentare sau de prețuri individuale?

Contactează-ne
CERETI PRODUSUL close
Vă mulțumim că ați trimis mesajul dvs. Vom răspunde cât mai curând posibil.
CERETI PRODUSUL close
Naviga
trimite o anchetă

Adaugă la lista de dorințe

trebuie să fii logat

Forming a Magnetic Steel Part


Objective: To heat a magnetic steel part for a forming application; the client had been using a torch for the application.


Frequency: 125 kHz


Equipment:
  • Ambrell EKOHEAT® 15 kW, 50-150 kHz induction heating system equipped with a remote workhead;
  • A single position multiple-turn helical coil designed specifically for this application.

Material: Magnetic steel part


Temperature: 1700 °F (927 °C)


Process:

Temperature indicating paint was applied to the part to easily identify when it achieved temperature, and then the induction power was turned on. It took about three minutes for the part to reach 1700 °F (927 °C) at 10 kW and two minutes and twenty seconds with 15 kW for this through-Curie heating application.


Benefits:
  • Speed: Induction heated the part to forming temperature more rapidly than a torch;
  • Precise, repeatable heating: Induction can target the precise portion of the part that requires heating every time;
  • Safety: An open flame creates safety concerns, whereas induction is a comparatively safe heating method;
mai puțin
Citeste mai mult
Comentarii (0)