trebuie să fii logat
-
întoarce-teX
-
Componente
-
-
Category
-
Semiconductoare
- Diode
- tiristoare
- Module izolate electric
- Redresoare în punte
-
Tranzistoare
- tranzistoare GeneSiC
- Module MOSFET Mitsubishi SiC
- Module MOSFET STARPOWER SiC
- Module MOSFET ABB SiC
- Module IGBT de la MITSUBISHI
- Module de tranzistori MITSUBISHI
- module MITSUBISHI MOSFET
- Module de tranzistori ABB
- Module IGBT de la POWEREX
- Module IGBT - de la INFINEON (EUPEC)
- Elemente semiconductoare din carbură de siliciu
- Accesați subcategoria
- Șoferii
- Blocuri de putere
- Accesați subcategoria
- Traductoare de curent și tensiune LEM
-
Componente pasive (condensatori, rezistențe, siguranțe, filtre)
- Rezistoare
-
Siguranțe
- Siguranțe miniaturale pentru sisteme electronice din seria ABC și AGC
- Siguranțe tubulare cu acțiune rapidă
- Inserții întârziate cu caracteristici GL/GG și AM
- Legături sigure ultra-rapide
- Siguranțe standard britanice și americane cu acțiune rapidă
- Siguranțe cu acțiune rapidă standard european
- Siguranțe de tracțiune
- Siguranțe de înaltă tensiune
- Accesați subcategoria
-
Condensatoare
- Condensatoare pentru motoare
- Condensatoare electrolitice
- Condensatori Icel Film
- Condensatoare de putere
- Condensatoare pentru circuite DC
- Condensatoare de compensare a puterii
- Condensatoare de înaltă tensiune
- Condensatoare pentru încălzire prin inducție
- Condensatoare de impulsuri
- Condensatoare DC LINK
- Condensatoare pentru circuite AC/DC
- Accesați subcategoria
- Filtre anti-interferențe
- Supercondensatoare
-
Protecție la supratensiune
- Descărcătoare de supratensiune pentru aplicații RF
- Descărcătoare de supratensiune pentru sisteme de vedere
- Descărcătoare de supratensiune pentru linia de alimentare
- Descărcătoare de supratensiune cu LED
- Descărcătoare de supratensiune pentru fotovoltaice
- Descărcătoare de supratensiune pentru sisteme de cântărire
- Descărcătoare de supratensiune pentru fieldbus
- Accesați subcategoria
- Filtre de emisii revelatoare TEMPEST
- Accesați subcategoria
-
Relee și Contactoare
- Teoria releelor și contactoarelor
- Relee cu stare solidă trifazată CA
- Relee cu stare solidă DC
- Regulatoare, sisteme de control și accesorii
- Porniri ușoare și contactoare inversoare
- Relee electromecanice
- Contactoare
- Comutatoare rotative
-
Relee cu stare solidă CA monofazate
- Relee cu stare solidă CA monofazate Seria 1 | D2425 | D2450
- Relee semifazate CA monofazate, seria CWA și CWD
- Relee semifazate CA monofazate seriile CMRA și CMRD
- Relee cu stare solidă CA monofazate Seria PS
- Relee cu stare solidă AC seria duble și cvadruple D24 D, TD24 Q, H12D48 D
- Relee monofazate din seria GN
- Relee cu stare solidă CA monofazate Seria CKR
- Relee monofazate pentru șină DIN AC SERIA ERDA și ERAA
- Relee AC monofazate pentru curent de 150A
- Relee duble cu stare solidă integrate cu radiator pe șină DIN
- Accesați subcategoria
- Relee cu stare solidă imprimabile monofazate CA
- Relee de interfață
- Accesați subcategoria
- Miezuri și alte componente inductive
- Radiatoare, Varistoare, Protectie termica
- Fani
- Aer conditionat, Accesorii tablou, Racitoare
-
Baterii, încărcătoare, surse de alimentare tampon și convertoare
- Baterii, încărcătoare - descriere teoretică
- Baterii litiu-ion. Baterii personalizate. Sistem de management al bateriei (BMS)
- baterii
- Incarcatoare de baterii si accesorii
- UPS și surse de alimentare tampon
- Convertoare si accesorii pentru fotovoltaice
- Stocarea energiei
- Pile de combustibil cu hidrogen
- Celule litiu-ion
- Accesați subcategoria
- Automatizare
-
Cabluri, fire Litz, Conduite, Conexiuni flexibile
- Firele
- Presetupe și manșoane
- Chipurile
-
Cabluri pentru aplicatii speciale
- Cabluri de prelungire și compensare
- Cabluri de termocuplu
- Cabluri de conectare pentru senzori PT
- Cabluri cu mai multe fire de temperatură. -60°C până la +1400°C
- Cabluri de medie tensiune SILICOUL
- Cabluri de aprindere
- Cabluri de incalzire
- Cabluri cu un singur conductor temp. -60°C până la +450°C
- Fire de cale ferată
- Cabluri de încălzire în ex
- Cabluri pentru industria de apărare
- Accesați subcategoria
- tricouri
-
Impletituri
- Impletituri plate
- Impletituri rotunde
- Impletituri foarte flexibile - plate
- Impletituri foarte flexibile - rotunde
- Impletituri cilindrice de cupru
- Impletituri si capace cilindrice din cupru
- Curele flexibile de împământare
- Impletituri cilindrice din otel zincat si inoxidabil
- Impletituri de cupru izolate PVC - temperatura de pana la 85 de grade C
- Impletituri plate din aluminiu
- Kit de conectare - impletituri si tuburi
- Accesați subcategoria
- Echipament de tracțiune
- Capse de cablu
- Sine flexibile izolate
- Sine flexibile multistrat
- Sisteme de management al cablurilor
- Accesați subcategoria
- Vezi toate categoriile
-
Semiconductoare
-
-
- Furnizori
-
Aplicații
- Automatizare HVAC
- Automatizare industrială
- Băncile de energie
- Cercetare si masuratori de laborator
- Componente pentru zonele cu pericol de explozie (EX)
- Echipament industrial de protectie
- Echipamente pentru dulapuri de distributie si control
- Exploatare minieră, metalurgie și turnătorie
- Imprimare
- Încălzire prin inducție
- Inginerie energetică
- Mașini CNC
- Masini de sudura si sudori
- Mașini de uscare și prelucrare a lemnului
- Masini pentru termoformarea materialelor plastice
- Măsurarea și reglarea temperaturii
- Motoare si transformatoare
- Surse de alimentare (UPS) și sisteme redresoare
- Tracțiune cu tramvai și feroviar
- Unități DC și AC (invertoare)
-
Instalare
-
-
Inductori
-
-
Dispozitive de inducție
-
-
https://www.dacpol.eu/pl/naprawy-i-modernizacje
-
-
Serviciu
-
- Kontakt
- Zobacz wszystkie kategorie
7th Generation 1700 V IGBT Modules: Loss Reduction and Excellent System Performance

7th Generation 1700 V IGBT Modules: Loss Reduction and Excellent System Performance
For power electronic systems like industrial drives and converters for renewable energy applications, the major system requirements are: high reliability, high efficiency, high power density and competitive costs. In order to meet these requirements, power loss reduction is a key factor. Power loss reduction enables designs with higher power densities and lower IGBT junction temperatures. As a result, higher reliability can be achieved and the cooling system can be accordingly optimized. Therefore, Mitsubishi Electric has developed the new 1.7 kV 7th generation IGBT modules with improved performance.
By Masaomi Miyazawa, Thomas Radke and Narender Lakshmanan, Mitsubishi Electric Europe B.V.
1. Introduction
Power module performance affects the overall efficiency of the power electronic system. Accordingly, power modules have to be carefully chosen for a given application depending on various electrical and thermal performance parameters. Mitsubishi Electric had launched the latest 7th generation industrial IGBT modules in the 650 V and 1200 V classes [1]. These modules have already been well accepted by the market due to the advantages with regards to the key system requirements: high power density, high efficiency and high reliability. Subsequently, the 1700 V IGBT modules were developed to support applications with system voltages of 690 Vac.
For renewable applications, the AC-grid filter size can be reduced by increasing the IGBT switching frequency. In case of motor drives, higher switching frequencies are considered beneficial especially for operation at high output frequencies. Unfortunately, the switching loss behavior of the existing 1700 V modules available at the market has not encouraged the designers to explore the possibility of increasing the switching frequency for availing system level benefits. In order to enable operation at reasonable switching frequencies (above 1000 Hz) with the 1.7 kV IGBT modules, the 7th generation IGBT chips and the RFC (Relaxed Field of Cathode) diode chips [2] were developed and optimized for achieving a significant reduction in power loss.
An optimized line-up from 100 A to 600 A current rating has been developed. Further module developments with higher rated currents (up to 1200A) are ongoing.
2. 7th generation chip performance
In order to offer the best electrical characteristics, the latest 7th generation CSTBT™ chip [4] and RFC diode have been used in the 1.7 kV IGBT modules. These chips possess an optimized structure and are thinner than previous generation devices. Additionally, the devices have been designed by selecting an appropriate trade-off between the DC performance and the switching performance.
2.1 IGBT chip
The IGBT power loss and the EMI profile has been optimized by designing an optimized MOS structure, advanced termination, and a reduction of the wafer thickness. Figure 1 shows the comparison of the trade-off between VCEsat and Eoff of the 7th generation IGBT with a standard IGBT chip available in the market today. The Eoff of the 7th generation IGBT is approximately 30 percent lower in spite of the same on-sate voltage drop.

Figure 1: Comparison of the trade-off between VCEsat and Eoff Conditions: VCC=1000 V, IC=600 A, Tj=125 °C, RG min.
2.2 Diode chip
The 7th generation 1.7kV IGBT module is equipped with the RFC diode in order to reduce power loss without generating unnecessary oscillations during switching. The RFC diode has a unique structure in which the P layer is partially added on the cathode side and holes are injected during the recovery period to soften the recovery waveform. Using the RFC structure, it was possible to develop a diode with a reduced wafer thickness and one which does not exhibit snappy behavior. Thus, it was possible to improve the diode trade-off (DC performance versus switching loss). Figure 2 shows the comparison of the trade-off between VF and Err. A significant reduction (about 50%) of recovery losses has been achieved. Additionally, the lower recovery charge Qrr results in a reduction of IGBT turn-on switching losses.

Figure 2: Comparison of the trade-off between VF and Err Conditions: VCC=1000 V, IC=600 A, Tj=125 °C, RG min.
3. Power loss comparison
A loss simulation for several application conditions has been performed by using the free simulation software Melcosim [5]. Figure 3 shows the overall power loss comparison of 600A/1700V IGBT module CM600DX(P)-34T [6] with the IGBT module from Manufacturer A. As evident from Fig. 3, the power loss of the 7th generation IGBT module is approximately 30 percent lower under typical application conditions (considering a switching frequency of 2 kHz). It is clear that a major contributor to the loss improvement is the reduction of diode switching losses and the IGBT switching losses. For a heatsink with Rth(s-a)=90 K/kW, the resulting IGBT-chip temperature Tj is 22 K lower at the given application conditions. However, if the junction temperature Tj is to be maintained the same, the output current can be increased by approximately 30%. Figure 4 shows the comparison of power loss in the 600A/1700V IGBT module as function of switching frequency. As evident from Fig. 4, the improvement rate is getting higher at a higher frequency. For example the power loss of the IGBT module from Manufacturer A at 2 kHz is almost the same as the overall power loss considering the 7th generation technology’s performance at 4 kHz switching frequency. As a result, by maintaining the same efficiency, the switching frequency could be doubled from 2 kHz to 4 kHz. This increase in the switching frequency enables a remarkable size and cost reduction of passive components like filter chokes.

Figure 3: The Power loss comparison of the 600A/1700V IGBT module at 2 kHz Conditions: VCC=1000 V, IO=270 A peak, fc=2 kHz, cos(φ)=0.8, M=1, Ta=40 °C, Rth(s-a)=90 K/kW, RG min.

Figure 4: The power loss comparison considering the 600A/1700V IGBT module for several switching frequencies Conditions: VCC=1000 V, IO=270 Apeak, cos(φ)=0.8, M=1, Tj=125 °C, RG min.
4. Expanded line-up
In order to meet various applications requirements, Mitsubishi Electric has developed a comprehensive modules line-up in 1.7 kV class. Table 1 shows the line-up which includes 12 module types in the NX-package ranging from 100 A to 600 A and 6 module types in the standard package ranging from 75 A to 400 A. In the NX-type package, both solder-pin and press-fit-pin options have been developed for each current rating. They have different terminals. The press-fit-pin package can be assembled by solderless press process to the PCB board. Furthermore, in the NX-type module, the SLC (Solid Cover) technology delivers an improved thermal cycle capability by combining a resininsulated metal baseplate and direct potting resin [3]. The advanced SLC technology enables the elimination of the internal bond wires between multiple ceramic substrates which resulting in lower parasitic inductance and higher reliability. In the standard-type module (refer to Table 1), the TMS (Thick Metal Substrate) technology eliminates the solder layer under the substrate and increases the thermal cycle capability [1]. The parasitic inductance has been reduced by improving the internal layout. In addition, the main terminal pitch for the 62× 108 mm package is 28 mm, which is compatible to the existing package in Europe. The 7th generation IGBT modules are available with the pre-applied PC-TIM (Phase Change Thermal Interface Material) optionally. It contributes to the simplification of the assembly process and improves the thermal contact between module base and heatsink.

Table 1: Expanded line-up in 1.7 kV class. In the NX-type package, there are two pin types (solder and press-fit) in the each current rating.
To support applications requiring higher power ratings, a new industrial IGBT module with a half bridge configuration is under development. This new power module package which is shown in Figure 5 has a dimension of 100x144x40 mm³. IGBT modules based on the 7th generation chip technology, with a current ratings up to 1200 A in the 1700 V category are under consideration. In case an application requires higher current (more than 1200A) this module is an ideal solution since it is optimized for parallel operation thereby providing a scalable and an efficient solution for high power applications.

Figure 5: New industrial IGBT module
5. Summary
In the analysis presented here, the IGBT chip performance exhibits approximately 30% improved trade-off between the VCEsat and Eoff. The diode chip performance exhibits 50% lower Err. By utilizing these devices, the overall power loss is approximately 30% lower and Tj is 22 K lower than the performance of the IGBT module from Manufacturer A at 2 kHz and even more significant in case of higher switching frequencies. This enables either 30% higher output power or doubling the switching frequency (cost saving of passive components).
It is evident that Mitsubishi Electric offers several different types of power semiconductor modules (18 types of module designs) utilizing latest technologies in order to deliver the best system performance and the highest system reliability in the 1700 V category.
References:
[1] M. Miyazawa et al., “7th Generation IGBT Module for Industrial Applications“, PCIM Europe 2014, Nuremberg, Germany, pp. 34-38.
[2] K. Nakamura et al., “Evaluation of Oscillatory Phenomena in Reverse Operation for High Voltage Diodes”, ISPSD 2009, Barcelona, Spain, pp. 156-159.
[3] T. Radke et al., “Enhanced Power Density and Expanded Line-up of the 7th Gen. Industrial IGBT Modules Utilizing the Improved Thermal Conductivity of the Highly Reliable SLC-Technology”, Bodo’s Power Systems, June 2016, pp. 16-22.
[4] H. Takahashi et al., ”Carrier Stored Trench-Gate Bipolar Transistor (CSTBT) – A Novel Power Device for High Voltage Application”, ISPSD 1996, Maui, USA, pp. 349-352.
[5] Melcosim Simulation software “www.mitsubishielectric.com/semiconductors/simulator/index.html”
[6] DatasheetCM600DX(P)-34T www.mitsubishielectric.com/semiconductors/php/oPartProfile.php?FILENAME=cm600dx-34t_e.pdf&FOLDER=/product/powermodule/igbt/t_series
Related posts


Leave a comment