![Металлопластиковое склеивание пивных бочек Металлопластиковое склеивание пивных бочек](https://www.dacpol.eu/27119-large_default/metalloplastikovoe-skleivanie-pivnykh-bochek.jpg)
![Металлопластиковое склеивание пивных бочек Металлопластиковое склеивание пивных бочек](https://www.dacpol.eu/27119-large_default/metalloplastikovoe-skleivanie-pivnykh-bochek.jpg)
Фотографии предназначены только для информационных целей. Посмотреть спецификацию продукта
please use latin characters
Objective: Bond an aluminium mesh to a plastic beer keg.
Frequency: 207 kHz
Material: Aluminium mesh, plastic keg 320 mm (12.5”) ID.
Temperature: 482 °F (250 °C)
A single-turn solenoid coil is placed around the assembled beer keg and heated for 35 seconds as the keg is rotated. Pressure is applied with a press on the top rim whilst the keg is rotating, forming a seal between the aluminium mesh and the two halves of the beer keg.
Вы заинтересованы в этом продукте? Вам нужна дополнительная информация или индивидуальные расценки?
Вы должны быть зарегистрированы
Objective: Bond an aluminium mesh to a plastic beer keg.
Frequency: 207 kHz
Material: Aluminium mesh, plastic keg 320 mm (12.5”) ID.
Temperature: 482 °F (250 °C)
A single-turn solenoid coil is placed around the assembled beer keg and heated for 35 seconds as the keg is rotated. Pressure is applied with a press on the top rim whilst the keg is rotating, forming a seal between the aluminium mesh and the two halves of the beer keg.