Последние записи

• 19/06/2023

  Smart Solution for 1500VDC 3-Level Central PV Inverters

  In general a problem occurs when 3-level NPC topologies are developed using several standard half bridge power modules. A series connection of IGBT modules results in high stray inductances which in combination with high switching di/dt cause high switching overvoltages [2]. IGBT modules with an integrated NPC topology phase-leg containing 4 IGBT and 6 diodes potentially have lower stray inductances but are not available for high current ratings and are more expensive due to the complex...

  Read more
• 12/06/2023

  LV100 IGBT Modules for Best Performance in Renewable and Industrial Applications

  Conventionally available IGBTs with 1700 V blocking voltage are designed for the requirements of motor control application in 690 VAC networks where DC-link voltage is typically about 970 V and maximum below 1200 V. For renewable applications, higher DClink voltage is required going up to 1500 V which is the limit of the low voltage directive (2014/35/EU). Hence, a new 2.0 kV class IGBT in the LV100 housing has been developed and evaluated under the requirements of renewable applications such...

  Read more
• 30/05/2023

  Moduł baterii dla zespołu studenckiego Formula SAE Electric!

  Enepaq to firma produkująca moduły baterii zlokalizowana w Wilnie na Litwie. Moduły baterii Enepaq mogą być stosowane w szerokim zakresie zastosowań, ale od samego początku i pierwsze moduły baterii zostały zaprojektowane specjalnie dla zespołów Formula SAE, aby stać się prawdziwymi liderami w wyścigach formuły elektrycznej, i w rezultacie Enepaq jest znany jako dostawca modułów baterii dla Formula Student.

  Read more
• 18/05/2023

  Questions on EMC

  The demands have grown on EMC know-how in modern product development. ICs today are much more sensitive and the number of EMC standards and directives which have to be complied with has risen too. This article deals with the possibilities open to an electronics' developer nowadays to optimise devices and circuits in terms of EMC. 

  Read more
• 14/04/2023

  New Development Tools and EMC Strategies in Step with Practical Electronics

  Imagine for a moment that you are trying out a brand new car: you slide into one of the ergonomic seats, start the engine and, to make things perfect, would like to listen to some music. But when you switch this on, you suddenly notice interesting side effects. The light comes on in the passenger compartment, for example. Or the radio starts whistling and whimpering.

  Read more
• 28/11/2023

  ESD Suppression on Microcontrollers at Board Level

  EMC tests identify potential EMC problems encountered by microcontrollers in practice. Electrostatic discharge is an issue of particular concern for circuits that include microcontrollers.

  Read more
• 07/04/2023

  Effective Strategies for Interference Immunity Analysis on the Board Level

  Complex devices with integrated circuits and a low supply voltage increasingly fail interference immunity tests. The localisation and elimination of weak points is a real challenge in such complex devices. The fast, specific and hence cost-saving elimination of weak points requires effective strategies and appropriate equipment for systematic immunity analysis on the board level.

  Read more
• 18/07/2023

  Вышка светозвуковой сигнализации взрывоопасных зон от нового Делового Партнера - ARTIDOR.

  Explosion-proof signaling tower equipped with universal and energy-saving LED lighting with vertically and horizontally cut lenses. The lenses and body are made of polycarbonate with properties resistant to difficult conditions.

  Read more
• 14/11/2023

  Insulation monitoring relays

  Insulation control relays are devices that are used to monitor the condition of insulation in electrical systems. Their main task is to detect insulation damage that can lead to dangerous situations such as fires or electric shock. An example of such devices are Trafox products such as IM-04DCCT, IM-04PV or IM-05DCCT.

  Read more
• 29/03/2023

  Switch to LED lighting and be prepared for EU’s prohibition of exploitation of fluorescent lamps

  If you are using fluorescent lighting in hazardous areas then you need to take actions right now.

  Read more
• 29/03/2023

  Pressure sensors in HVAC applications

  Pressure sensors are an essential element of automation of ventilation systems. These sensors are designed to measure air or gas pressure and provide accurate readings to the control system. Automation of ventilation systems is becoming more and more important in modern buildings because it allows better control of air quality and energy efficiency. Pressure sensors are used to monitor pressure in channels, pipes and other elements of the ventilation system. They can detect pressure changes...

  Read more
• 22/03/2023

  Mitsubishi Electric построит новый завод по производству силовых полупроводников SiC

  Mitsubishi Electric Corporation (TOKYO: 6503) announced today that it will double a previously announced its investment plan to approximately 260 billion yen in the five-year period to March 2026 mainly for constructing a new wafer plant to increase production of silicon carbide (SiC) power semiconductors.

  Read more
• 22/03/2023

  Explosion venting in hazardous areas

  Actions taken to eliminate or reduce the risk of explosion should lead to the complete removal of the risk of explosion. In reality, however, it often happens that it is not possible to get rid of the explosive atmosphere, because these are the conditions of the processes being carried out or it would require huge financial outlays.

  Read more
• 16/12/2022

  Przemysł prefabrykatów betonowych — seria zastosowań: 5 z 5

  Suwnice pomostowe i bramowe są niezbędne, aby przemieszczanie ciężkich materiałów było wydajne, skuteczne i bez szkody dla personelu. Podczas produkcji cementu ciężkie elementy wyposażenia, jak również gotowe prefabrykaty wymagają transportu do obszarów magazynowych i/lub ciężarówek w celu dystrybucji.

  Read more
• 16/12/2022

  Przemysł prefabrykatów betonowych — seria zastosowań: 4 z 5

  Komórka produkcyjna prefabrykowanych bloków betonowych i płytek stwarza wiele zagrożeń dla pracowników i sprzętu. Sprzęt pod napięciem, maszyny obrotowe, piły i przecinarki przemysłowe, punkty zakleszczenia oraz punkty dostępu częściowego i/lub całego ciała stwarzają możliwość urazów kończyn. Zapewnienie przestrzegania właściwej kolejności czynności związanych z bezpieczeństwem zmniejszy ryzyko obrażeń.

  Read more
• 16/12/2022

  Precast Concrete Industry – Application Series: 3 of 5

  Concrete is the most common used man-made material on earth. The uses of concrete range from structural applications to piping, drains, and pavers. Buildings, bridges, roads, and more could not be constructed without this important material.

  Read more
• 16/12/2022

  Precast Concrete Industry – Application Series: 2 of 5

  Τhe storage of aggregate for various usage can lead to the potential risk to personnel involving engulfment within hoppers (confined space) and loss of materials due to incorrect materials loading. Protecting workers from confined space hazards that can occur during maintenance, cleaning, filling, and unloading of hoppers is critical within a gravel pit.

  Read more
• 01/03/2023

  Pulsiv OSMIUM: Transforming AC-DC Power Conversion with Unmatched Efficiency and Versatility

  Using a patented switching technique, Pulsiv has developed an entirely new method for converting AC to DC that delivers a combination of game changing benefits in power electronics designs. Our unique technology has extended the range of conventional flyback topologies to replace expensive LLC solutions, whilst achieving an unrivalled efficiency profile.

  Read more