![Quattro инвертор / зарядное устройство Quattro инвертор / зарядное устройство](https://www.dacpol.eu/8338-large_default/quattro-inverter-charger.jpg)
![Quattro инвертор / зарядное устройство Quattro инвертор / зарядное устройство](https://www.dacpol.eu/8338-large_default/quattro-inverter-charger.jpg)
Category
Montaż urządzeń
Modernizacja induktorów
Urządzenia indukcyjne
asd
Фотографии предназначены только для информационных целей. Посмотреть спецификацию продукта
please use latin characters
3kVA – 15kVA
![]() |
![]() |
Quattro 48/5000/70-100/100 | Quattro 24/3000/70-50/30 |
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC Outputs
The main output has no-break functionality. The Quattro Yeses over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
Virtually unlimited power thanks to parallel operation
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 54kW / 60kVA output power and 840 Amps charging capacity. .
Three phase capability
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 162kW / 180kVA inverter power and more than 2500A charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then Yese account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.
PPowerAssist – Boosting shore or generator power
Ta cecha pozwala Quattrona chwilowe zwiększenie mocy wyjściowej. Tam, gdzie wysoka moc jest wymagana jedynie przez ograniczony czas, Quattro zapewni, że niewystarczająca moc źródła AC zostanie natychmiastowo uzupełniona przez energię z akumulatorów. Kiedy obciążenie się zmniejsza, dodatkowa moc jest zużywana na ładowanie baterii.
Czterostopniowa adaptacyjna ładowarka z dwoma wyjściami
This feature Yeses the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power panel, Color Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be change
Quattro | 12/3000/120-50/30 24/3000/70-50/30 |
12/5000/220-100/100 24/5000/120-100/100 48/5000/70-100/100 |
24/8000/200-100/100 48/8000/110-100/100 |
48/10000/140-100/100 |
---|---|---|---|---|
PowerControl / PowerAssist | Yes | |||
Integrated Transfer switch | Yes | |||
AC Input(x2) | Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 |
|||
Maximum feed through current [A] | 50/30 | 2x100 | 2x100 | 2x100 |
INWERTER | ||||
Input voltage range [V DC] |
9,5-17V 19-33V 38-66V | |||
Output (1) | Output voltage: 230V AC +-2% Frequency: 50Hz +-0,1% | |||
Cont. output power at 25oC [VA] (3) | 3000 | 5000 | 8000 | 10000 |
Cont. output power at 25oC [W] | 2500 | 4500 | 7000 | 9000 |
Cont. output power at 40oC [W] | 2200 | 4000 | 6300 | 8000 |
Peak power [W] | 6000 | 10000 | 16000 | 20000 |
Maximum efficiency [%] | 93 / 94 | 94 / 94 / 95 | 94 / 96 | 96 |
Zero load power [W] | 15 / 15 | 25 / 25 / 25 | 30 / 35 | 35 |
Zero load power in AES mode[W] | 10 / 10 | 20 / 20 / 20 | 25 / 30 | 30 |
Zero load power in Search mode[W] | 4 / 5 | 5 / 5 / 6 | 8 / 10 | 10 |
CHARGER | ||||
Charge voltage 'absorption' [V DC] |
14,4 / 28,8 | 14,4 / 28,8 / 57,6 | 28,8 / 57,6 | 57,6 |
Charge voltage ‘float’ [V DC] | 13,8 / 27,6 | 13,8 / 27,6 / 55,2 | 27,6 / 55,2 | 55,2 |
Storage mode [V DC] | 13,2 / 26,4 | 13,2 / 26,4 / 52,8 | 26,4 / 52,8 | 52,8 |
Charge cyrrent house battery[A] (4) | 120 / 70 | 220 / 120 / 70 | 200 / 110 | 140 |
Charge current starter battery [A] | 4 (only in 12V and i 24V) | |||
Battery temperature sensore | Yes | |||
GENERAL | ||||
Auxiliary output [A] (5) | 25 | 50 | 50 | 50 |
Programmable relay (6) | 1x | 3x | 3x | 3x |
Protection (2) | a – g | |||
VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration | |||
General purpose com. port | 1x | 2x | 2x | 2x |
Remote on-off | Yes | |||
Common Characteristics | Operating temp.: -40 to +65˚C Humidity (non-condensing): max. 95% | |||
ENCLOSURE | ||||
Common Characteristics | Material [&] Colour: aluminium (blue RAL 5012) Protection category: IP 21 | |||
Battery-connection | Four M8 bolts (2 plus and 2 minus connections) | |||
230V AC-connection |
Screw terminals 13 mm2(6 AWG) |
Bolts M6 | Bolts M6 | Bolts M6 |
Weight [kg] | 19 | 34/30/30 | 45/41 | 45 |
Dimensions (hxwxd in mm) | 362 x 258 x 218 | 470 x 350 x 280 444 x 328 x 240 444 x 328 x 240 |
470 x 350 x 280 | 470 x 350 x 280 |
STANDARDS | ||||
Safety | EN 60335-1, EN 60335-2-29 | |||
Emission, Immunity | EN55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1 | |||
|
DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC |
Example symbols
Вы заинтересованы в этом продукте? Вам нужна дополнительная информация или индивидуальные расценки?
Вы должны быть зарегистрированы
3kVA – 15kVA
![]() |
![]() |
Quattro 48/5000/70-100/100 | Quattro 24/3000/70-50/30 |
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC Outputs
The main output has no-break functionality. The Quattro Yeses over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
Virtually unlimited power thanks to parallel operation
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 54kW / 60kVA output power and 840 Amps charging capacity. .
Three phase capability
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 162kW / 180kVA inverter power and more than 2500A charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then Yese account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.
PPowerAssist – Boosting shore or generator power
Ta cecha pozwala Quattrona chwilowe zwiększenie mocy wyjściowej. Tam, gdzie wysoka moc jest wymagana jedynie przez ograniczony czas, Quattro zapewni, że niewystarczająca moc źródła AC zostanie natychmiastowo uzupełniona przez energię z akumulatorów. Kiedy obciążenie się zmniejsza, dodatkowa moc jest zużywana na ładowanie baterii.
Czterostopniowa adaptacyjna ładowarka z dwoma wyjściami
This feature Yeses the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power panel, Color Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be change
Quattro | 12/3000/120-50/30 24/3000/70-50/30 |
12/5000/220-100/100 24/5000/120-100/100 48/5000/70-100/100 |
24/8000/200-100/100 48/8000/110-100/100 |
48/10000/140-100/100 |
---|---|---|---|---|
PowerControl / PowerAssist | Yes | |||
Integrated Transfer switch | Yes | |||
AC Input(x2) | Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 |
|||
Maximum feed through current [A] | 50/30 | 2x100 | 2x100 | 2x100 |
INWERTER | ||||
Input voltage range [V DC] |
9,5-17V 19-33V 38-66V | |||
Output (1) | Output voltage: 230V AC +-2% Frequency: 50Hz +-0,1% | |||
Cont. output power at 25oC [VA] (3) | 3000 | 5000 | 8000 | 10000 |
Cont. output power at 25oC [W] | 2500 | 4500 | 7000 | 9000 |
Cont. output power at 40oC [W] | 2200 | 4000 | 6300 | 8000 |
Peak power [W] | 6000 | 10000 | 16000 | 20000 |
Maximum efficiency [%] | 93 / 94 | 94 / 94 / 95 | 94 / 96 | 96 |
Zero load power [W] | 15 / 15 | 25 / 25 / 25 | 30 / 35 | 35 |
Zero load power in AES mode[W] | 10 / 10 | 20 / 20 / 20 | 25 / 30 | 30 |
Zero load power in Search mode[W] | 4 / 5 | 5 / 5 / 6 | 8 / 10 | 10 |
CHARGER | ||||
Charge voltage 'absorption' [V DC] |
14,4 / 28,8 | 14,4 / 28,8 / 57,6 | 28,8 / 57,6 | 57,6 |
Charge voltage ‘float’ [V DC] | 13,8 / 27,6 | 13,8 / 27,6 / 55,2 | 27,6 / 55,2 | 55,2 |
Storage mode [V DC] | 13,2 / 26,4 | 13,2 / 26,4 / 52,8 | 26,4 / 52,8 | 52,8 |
Charge cyrrent house battery[A] (4) | 120 / 70 | 220 / 120 / 70 | 200 / 110 | 140 |
Charge current starter battery [A] | 4 (only in 12V and i 24V) | |||
Battery temperature sensore | Yes | |||
GENERAL | ||||
Auxiliary output [A] (5) | 25 | 50 | 50 | 50 |
Programmable relay (6) | 1x | 3x | 3x | 3x |
Protection (2) | a – g | |||
VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration | |||
General purpose com. port | 1x | 2x | 2x | 2x |
Remote on-off | Yes | |||
Common Characteristics | Operating temp.: -40 to +65˚C Humidity (non-condensing): max. 95% | |||
ENCLOSURE | ||||
Common Characteristics | Material [&] Colour: aluminium (blue RAL 5012) Protection category: IP 21 | |||
Battery-connection | Four M8 bolts (2 plus and 2 minus connections) | |||
230V AC-connection |
Screw terminals 13 mm2(6 AWG) |
Bolts M6 | Bolts M6 | Bolts M6 |
Weight [kg] | 19 | 34/30/30 | 45/41 | 45 |
Dimensions (hxwxd in mm) | 362 x 258 x 218 | 470 x 350 x 280 444 x 328 x 240 444 x 328 x 240 |
470 x 350 x 280 | 470 x 350 x 280 |
STANDARDS | ||||
Safety | EN 60335-1, EN 60335-2-29 | |||
Emission, Immunity | EN55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1 | |||
|
DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC |
Example symbols
Не удаётся отправить вашу оценку отзыва
Пожаловаться на комментарий
Жалоба отправлена
Не удаётся отправить вашу жалобу
Оставьте свой отзыв
Отзыв отправлен
Не удаётся отправить отзыв