Формирование тефлонового наконечника катетера
  • Формирование тефлонового наконечника катетера

Фотографии предназначены только для информационных целей. Посмотреть спецификацию продукта

please use latin characters

Формирование тефлонового наконечника катетера

Molding a Teflon Catheter Tip

Objective: Heat a water-cooled steel mandrel to 700°F (371ºC) to form a high quality Teflon catheter tip.

Material: Teflon catheter tubing, mandrel assembly

Temperature: 600-700°F (315.6-371ºC)

Frequency: 376 kHz

Equipment:

  • Ambrell 3 kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor
  • An induction heating coil designed and developed specifically for this application

Process: A two turn coil is used to heat the steel mandrel to 660ºF (371.1ºC) in 2.7 seconds. To form the catheter tip, RF power is applied while the catheter is held over the mandrel. The tubing is then pushed on to the mandrel to form a consistent, even tip.

Benefits:

  • Precise, repeatable application of heat
  • Non-contact heating
  • Faster cycle times

Отправить запрос

Вы заинтересованы в этом продукте? Вам нужна дополнительная информация или индивидуальные расценки?

Свяжитесь с нами
СПРОСИТЕ ПРОДУКТ close
Спасибо за отправку вашего сообщения. Мы ответим как можно скорее.
СПРОСИТЕ ПРОДУКТ close
Просматривать

Добавить в список желаний

Вы должны быть зарегистрированы

Molding a Teflon Catheter Tip

Objective: Heat a water-cooled steel mandrel to 700°F (371ºC) to form a high quality Teflon catheter tip.

Material: Teflon catheter tubing, mandrel assembly

Temperature: 600-700°F (315.6-371ºC)

Frequency: 376 kHz

Equipment:

  • Ambrell 3 kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor
  • An induction heating coil designed and developed specifically for this application

Process: A two turn coil is used to heat the steel mandrel to 660ºF (371.1ºC) in 2.7 seconds. To form the catheter tip, RF power is applied while the catheter is held over the mandrel. The tubing is then pushed on to the mandrel to form a consistent, even tip.

Benefits:

  • Precise, repeatable application of heat
  • Non-contact heating
  • Faster cycle times

Комментарии (0)