К-ЗОРБ 3000 КС (велика пропустљивост изнад 2ГХз)
  • К-ЗОРБ 3000 КС (велика пропустљивост изнад 2ГХз)

Фотографије су само у информативне сврхе. Погледајте спецификацију производа

please use latin characters

Произвођач: LAIRD TECHNOLOGIES

К-ЗОРБ 3000 КС (велика пропустљивост изнад 2ГХз)

Q-ZORB 3000 HP (high permeability<2GHZ)


Q-Zorb 3000 is used in situations where low frequency (< 2 GHz) noise problems are occurring. Some applications include

  • Die cut components placed in microwave cavities
  • Place on top of noisy chip to reduce emissions
  • Wrapped around cables to reduce conducted emissions
  • Used inside of board level shields to improve shielding performance
 

Typical attenuation values

Table of physical properties

Size 3535 .006” x 12” x 13”
3535-S .006” x 4” x 6”
3536 .020” x 12” x 13”
3536-S .020” x 4”x 6”
Permeability u’ (1MHz) 37
Electrical resistivity (Ohm) 6 x 1010
Specific gravity 3.1
Tensile strength (MPa) 1.9
Hardness (Durometer A) 70 ± 10%
Thermal conductivity (W / mk) 1.0
Flammability UL94 V-0
 

Пошаљите упит

Да ли вас занима овај производ? Да ли су вам потребне додатне информације или појединачне цене?

Контактирајте нас
Питајте производ close
Порука је послата.
Питајте производ close
Прегледајте

Додај у листу жеља

морате бити пријављени

Q-ZORB 3000 HP (high permeability<2GHZ)


Q-Zorb 3000 is used in situations where low frequency (< 2 GHz) noise problems are occurring. Some applications include

  • Die cut components placed in microwave cavities
  • Place on top of noisy chip to reduce emissions
  • Wrapped around cables to reduce conducted emissions
  • Used inside of board level shields to improve shielding performance
 

Typical attenuation values

Table of physical properties

Size 3535 .006” x 12” x 13”
3535-S .006” x 4” x 6”
3536 .020” x 12” x 13”
3536-S .020” x 4”x 6”
Permeability u’ (1MHz) 37
Electrical resistivity (Ohm) 6 x 1010
Specific gravity 3.1
Tensile strength (MPa) 1.9
Hardness (Durometer A) 70 ± 10%
Thermal conductivity (W / mk) 1.0
Flammability UL94 V-0