Даљински ИО модули за бившу 1/21 или 2/22 зоне
  • Даљински ИО модули за бившу 1/21 или 2/22 зоне

Фотографије су само у информативне сврхе. Погледајте спецификацију производа

please use latin characters

Произвођач: BEx-Solution

Даљински ИО модули за бившу 1/21 или 2/22 зоне

Compact Remote IO modules for Ex Zone 1/21 or Zone 2/22 with Profinet or Modbus TCP/IP. The modules include busnode, isolating amplifier and 32 intrinsically safe analog and digital IO channels on smallest space.

BEx1module can be installed in Zone 1/21 with certified Ex e enclosure and connects sensors and actuators from Zone 0/20.

BEx2 module can be installed in Zone 2/22, in a suita-ble housing according EN 60079-7:2018 with a protec-tion degree of at least IP 54 and connects sensors and actuators from Zone 0/20.



Features

  • Fully potted → extreme robust
  • IO variations:
    • 16xDI Namur / 16xDO
    • 32xDI Namur
    • 8xDI Namur / 8xDO / 8xAI / 8xAO
    • 8xDI Namur / 16xDO / 8xAI
    • 8xDI Namur / 8xDO / 8xSwitch Mode
  • None configuration on module required
  • Separate power supply for sensor and actuator
  • Comprehensive diagnostics for each channel:
    • open load detection
    • prefault detection
    • short circuit detection
  • Galvanic separation between channel and system
  • Internal temperature monitoring
  • Operating hour counter

BEx1 Explosion protection


EPS 19 ATEX 1 219 X
II 2(1) G Ex eb mb [ia Ga] IIC T4 Gb
II (1) D [Ex ia Da] IIIC
IECEx EPS 19.0093X
Ex eb mb [ia Ga] IIC T4 Gb
[Ex ia Da] IIIC


BEx2 Explosion protection


EPS 19 ATEX 1 248 X
II 3(1) G Ex ec mc [ia Ga] IIC T4 Gc
II (1) D [Ex ia Da] IIIC
IECEx EPS 19. 0111X
Ex ec mc [ia Ga] IIC T4 Gc
[Ex ia Da] IIIC



Power supply


Operation voltage UA/US DC 18…30V
Current module and sensor supply IS DC 450 mA
Current actuator supply IA DC 300 mA
Power dissipation max. 15 W
Reverse polarity protection Yes
LED Voltage > 18 V Green
LED Undervoltage Red



Fieldbus data


Addressing Profinet via DCP
Addressing Modbus TCP/IP DHCP
Transfer Rate 10/100 MBit/s
Signal change delay < 10 ms
LED Status Ethernet LINK Green
LED Status Ethernet ACT Yellow
LED Modul status Green/red
LED Digital output on Yellow
LED Error detection Red



Ambient conditions


Range of the service temperature after installation inside additional enclosure -40 °C … +70 °C
Storage temperature -40 °C … +80 °C
Enclosure type (EN 60529) IP 20



Mechanical data


Dimensions (LxWxH) 214 x 132 x 65 mm
Mounting holes ∅ 5,2
Mounting space 200 mm
Mounting position any position
Weight approx. 2700g
Housing material Aluminium (electroplated)
Housing marking laser engraving



IO variations (X1 – X8)


  8xDI / 8xDO / 8xAI / 8xAO
8xDI / 16xDO / 8xAI
8xDI / 8xDO / 8xSwitch Mode
Zone 1 Type : 14200*00
Zone 2 Type : 24200*00		 16DI / 16DO
16DI / 8DO / 8AIO
16xDI / 8xDO/ 8xSwitch Mode
Zone 1 Type : 14200*00
Zone 2 Type : 24200*00		 32DI
Zone 1 Type : 14200*02
Zone 2 Type : 24200*02
AI / Switch Mode (-) DO / AO / AI / Switch Mode (+) DI
GND GND / Switch Mode (-) GND
AO / DO / Switch Mode (+) DI DI
GND GND GND
DI DI DI
GND GND GND
DO DO DI
GND GND GND



IO functions


DI Namur 8,2 V
(I2,1mA = off)
DO (can also be used as power supply) 24 V
(Imax = 25 mA)
AI and AO

Resolution AI and AO
Measurement deviation (at 25 °C)
Ambient temperature influence		 24 V
(Imax = 25 mA)
16 bit
± 0,1%
±0,01%/K
AO to DO 24 V
(Imax = 25 mA)
Switch Mode 24 V
(Imax = 4 mA)

Electrical connection


Earthing / Equipotential bonding via M4 screw and eyelet
Cable cross-section

min. 4,0mm2
CAGE CLAMP® connection technology
X1-X8 (pluggable) Inputs/Outputs (Ex i)
Cable cross-section
X9 Power supply (Ex e)
Cable cross-section
X10 Bus (Ex e)
Cable cross-section
max. 1,5 mm2

max. 2,5 mm2

max. 2,5 mm2



Commercial data


Zone 1/21
BEx1(8AI/8AO/8DI/8DO)
Profinet Order No.
Modbus Order No.		 14200100
14200300
BEx1(16DI/16DO)
Profinet Order No.
Modbus Order No.		 14200101
14200301
BEx1(32DI)
Profinet Order No.
Modbus Order No.		 14200102
14200302
Zone 2/22
BEx2(8AI/8AO/8DI/8DO)
Profinet Order No.
Modbus Order No.		 24200100
24200300
BEx2(16DI/16DO)
Profinet Order No.
Modbus Order No.		 24200101
24200301
BEx2(32DI)
Profinet Order No.
Modbus Order No.		 24200102
24200302
Country of origin DE
Packaging unit 1
Customs tariff number 85176200
 

Further information see certificate and manual.


Approval data (max. Um X9 / X10, DC 30V)


Terminals Parameter
Terminal block X1 do X8 (maximum values for Zone 0 connection)
Clamp 26V U0 = 26 V DC
I0 = 82 mA
P0 = 533 mW

Group IIC
L0 3 mH 1 mH 0,5 mH 0 mH
C0 42 nF 62 nF 78 nF 99 nF
Group IIB / III
L0 20 mH 2 mH 0,5 mH 0 mH
C0 350 nF 350 nF 490 nF 770 nF
Clamp 9,6V U0 = 9,6 V DC
I0 = 31 mA
P0 = 75 mW

Group IIC
L0 49 mH 10 mH 1 mH 0 mH
C0 310 μF 640 μF 1,1 μF 3,6 μF
Group IIB / III
L0 100 mH 10 mH 1 mH 0 mH
C0 2 μF 350 μF 490 μF 770 μF
Clamp GND Galvanically separated from GND

    Type: 14200*00
Type: 24200*00		 Type: 14200*01
Type: 24200*01		 Type: 14200*02
Type: 24200*02
Clamp 1 U0 = 26 V DC U0 = 26 V DC U0 = 9,6 V DC
Clamp 2 GND GND GND
Clamp 3 U0 = 26 V DC U0 = 9,6 V DC U0 = 9,6 V DC
Clamp 4 GND GND GND
Clamp 5 U0 = 9,6 V DC U0 = 9,6 V DC U0 = 9,6 V DC
Clamp 6 GND GND GND
Clamp 17 U0 = 26 V DC U0 = 26 V DC U0 = 9,6 V DC
Clamp 28 GND GND GND
Мање
Опширније

Пошаљите упит

Да ли вас занима овај производ? Да ли су вам потребне додатне информације или појединачне цене?

Контактирајте нас
Питајте производ close
Хвала вам што сте послали поруку. Одговорићемо у најкраћем могућем року.
Питајте производ close
Прегледајте
пошаљите упит

Додај у листу жеља

морате бити пријављени

Compact Remote IO modules for Ex Zone 1/21 or Zone 2/22 with Profinet or Modbus TCP/IP. The modules include busnode, isolating amplifier and 32 intrinsically safe analog and digital IO channels on smallest space.

BEx1module can be installed in Zone 1/21 with certified Ex e enclosure and connects sensors and actuators from Zone 0/20.

BEx2 module can be installed in Zone 2/22, in a suita-ble housing according EN 60079-7:2018 with a protec-tion degree of at least IP 54 and connects sensors and actuators from Zone 0/20.



Features

  • Fully potted → extreme robust
  • IO variations:
    • 16xDI Namur / 16xDO
    • 32xDI Namur
    • 8xDI Namur / 8xDO / 8xAI / 8xAO
    • 8xDI Namur / 16xDO / 8xAI
    • 8xDI Namur / 8xDO / 8xSwitch Mode
  • None configuration on module required
  • Separate power supply for sensor and actuator
  • Comprehensive diagnostics for each channel:
    • open load detection
    • prefault detection
    • short circuit detection
  • Galvanic separation between channel and system
  • Internal temperature monitoring
  • Operating hour counter

BEx1 Explosion protection


EPS 19 ATEX 1 219 X
II 2(1) G Ex eb mb [ia Ga] IIC T4 Gb
II (1) D [Ex ia Da] IIIC
IECEx EPS 19.0093X
Ex eb mb [ia Ga] IIC T4 Gb
[Ex ia Da] IIIC


BEx2 Explosion protection


EPS 19 ATEX 1 248 X
II 3(1) G Ex ec mc [ia Ga] IIC T4 Gc
II (1) D [Ex ia Da] IIIC
IECEx EPS 19. 0111X
Ex ec mc [ia Ga] IIC T4 Gc
[Ex ia Da] IIIC



Power supply


Operation voltage UA/US DC 18…30V
Current module and sensor supply IS DC 450 mA
Current actuator supply IA DC 300 mA
Power dissipation max. 15 W
Reverse polarity protection Yes
LED Voltage > 18 V Green
LED Undervoltage Red



Fieldbus data


Addressing Profinet via DCP
Addressing Modbus TCP/IP DHCP
Transfer Rate 10/100 MBit/s
Signal change delay < 10 ms
LED Status Ethernet LINK Green
LED Status Ethernet ACT Yellow
LED Modul status Green/red
LED Digital output on Yellow
LED Error detection Red



Ambient conditions


Range of the service temperature after installation inside additional enclosure -40 °C … +70 °C
Storage temperature -40 °C … +80 °C
Enclosure type (EN 60529) IP 20



Mechanical data


Dimensions (LxWxH) 214 x 132 x 65 mm
Mounting holes ∅ 5,2
Mounting space 200 mm
Mounting position any position
Weight approx. 2700g
Housing material Aluminium (electroplated)
Housing marking laser engraving



IO variations (X1 – X8)


  8xDI / 8xDO / 8xAI / 8xAO
8xDI / 16xDO / 8xAI
8xDI / 8xDO / 8xSwitch Mode
Zone 1 Type : 14200*00
Zone 2 Type : 24200*00		 16DI / 16DO
16DI / 8DO / 8AIO
16xDI / 8xDO/ 8xSwitch Mode
Zone 1 Type : 14200*00
Zone 2 Type : 24200*00		 32DI
Zone 1 Type : 14200*02
Zone 2 Type : 24200*02
AI / Switch Mode (-) DO / AO / AI / Switch Mode (+) DI
GND GND / Switch Mode (-) GND
AO / DO / Switch Mode (+) DI DI
GND GND GND
DI DI DI
GND GND GND
DO DO DI
GND GND GND



IO functions


DI Namur 8,2 V
(I2,1mA = off)
DO (can also be used as power supply) 24 V
(Imax = 25 mA)
AI and AO

Resolution AI and AO
Measurement deviation (at 25 °C)
Ambient temperature influence		 24 V
(Imax = 25 mA)
16 bit
± 0,1%
±0,01%/K
AO to DO 24 V
(Imax = 25 mA)
Switch Mode 24 V
(Imax = 4 mA)

Electrical connection


Earthing / Equipotential bonding via M4 screw and eyelet
Cable cross-section

min. 4,0mm2
CAGE CLAMP® connection technology
X1-X8 (pluggable) Inputs/Outputs (Ex i)
Cable cross-section
X9 Power supply (Ex e)
Cable cross-section
X10 Bus (Ex e)
Cable cross-section
max. 1,5 mm2

max. 2,5 mm2

max. 2,5 mm2



Commercial data


Zone 1/21
BEx1(8AI/8AO/8DI/8DO)
Profinet Order No.
Modbus Order No.		 14200100
14200300
BEx1(16DI/16DO)
Profinet Order No.
Modbus Order No.		 14200101
14200301
BEx1(32DI)
Profinet Order No.
Modbus Order No.		 14200102
14200302
Zone 2/22
BEx2(8AI/8AO/8DI/8DO)
Profinet Order No.
Modbus Order No.		 24200100
24200300
BEx2(16DI/16DO)
Profinet Order No.
Modbus Order No.		 24200101
24200301
BEx2(32DI)
Profinet Order No.
Modbus Order No.		 24200102
24200302
Country of origin DE
Packaging unit 1
Customs tariff number 85176200
 

Further information see certificate and manual.


Approval data (max. Um X9 / X10, DC 30V)


Terminals Parameter
Terminal block X1 do X8 (maximum values for Zone 0 connection)
Clamp 26V U0 = 26 V DC
I0 = 82 mA
P0 = 533 mW

Group IIC
L0 3 mH 1 mH 0,5 mH 0 mH
C0 42 nF 62 nF 78 nF 99 nF
Group IIB / III
L0 20 mH 2 mH 0,5 mH 0 mH
C0 350 nF 350 nF 490 nF 770 nF
Clamp 9,6V U0 = 9,6 V DC
I0 = 31 mA
P0 = 75 mW

Group IIC
L0 49 mH 10 mH 1 mH 0 mH
C0 310 μF 640 μF 1,1 μF 3,6 μF
Group IIB / III
L0 100 mH 10 mH 1 mH 0 mH
C0 2 μF 350 μF 490 μF 770 μF
Clamp GND Galvanically separated from GND

    Type: 14200*00
Type: 24200*00		 Type: 14200*01
Type: 24200*01		 Type: 14200*02
Type: 24200*02
Clamp 1 U0 = 26 V DC U0 = 26 V DC U0 = 9,6 V DC
Clamp 2 GND GND GND
Clamp 3 U0 = 26 V DC U0 = 9,6 V DC U0 = 9,6 V DC
Clamp 4 GND GND GND
Clamp 5 U0 = 9,6 V DC U0 = 9,6 V DC U0 = 9,6 V DC
Clamp 6 GND GND GND
Clamp 17 U0 = 26 V DC U0 = 26 V DC U0 = 9,6 V DC
Clamp 28 GND GND GND
Мање
Опширније
Komentari (0)