

Ви повинні увійти в систему
Category
Montaż urządzeń
Modernizacja induktorów
Urządzenia indukcyjne
asd
Фотографії призначені тільки для інформаційних цілей. Подивитися специфікацію продукту
please use latin characters
Alumina 99.5% porous
Due to the low thermal capacity, the energy demand of the kiln is lower compared to conventional sintered plates. The time and energy required to heat up and cool down the kiln equipment is significantly reduced by using KERAFOL® sintered plates.
Our customers use these sinters to sinter low temperature co-fired ceramics (LTCC), solid oxide fuel cells, dental ceramics, and to debind and sinter metal injection molding (MIM) stainless steel components. The high flatness of Keralpor 99 leads to accurate sintering results. Due to the high porosity of the alumina matrix, gases can easily diffuse through the sinter during the debinding and sintering process.
Parts do not adhere to the sinter during the debinding process. Keralpor 99 works best as a sintered board on furniture made of silicon carbide, mullite, corundum, molybdenum or graphite.
All sizes are available in thicknesses
1,0 / 1,5 / 2,0 mm!
Ask for dimensions tailored to your needs and we will quickly create your Keralpor 99.
Typical features | Unit | Value |
---|---|---|
Color | - | white |
Gross density | g/cm3 | 2,56 |
Surface roughness Ra | µm | 0,7 |
Bending strength | MPa | >50 |
Bend | % | < 0,3 |
Porosity | Vol.% | 36 - 38 |
Average pore size | µm | 1 |
Dimensions | mm | 10 x 10 do 310 x 310 |
Standard thicknesses | mm | 1,0 / 1,5 / 2,0 |
Main ingredients | % | 99,5 Al2O3 |
Maximum operating temperature | Tmax | 1500°C |
Benefits
Usage
Ви зацікавлені у цьому продукті? Вам потрібна додаткова інформація або індивідуальні розцінки?
Ви повинні увійти в систему
Alumina 99.5% porous
Due to the low thermal capacity, the energy demand of the kiln is lower compared to conventional sintered plates. The time and energy required to heat up and cool down the kiln equipment is significantly reduced by using KERAFOL® sintered plates.
Our customers use these sinters to sinter low temperature co-fired ceramics (LTCC), solid oxide fuel cells, dental ceramics, and to debind and sinter metal injection molding (MIM) stainless steel components. The high flatness of Keralpor 99 leads to accurate sintering results. Due to the high porosity of the alumina matrix, gases can easily diffuse through the sinter during the debinding and sintering process.
Parts do not adhere to the sinter during the debinding process. Keralpor 99 works best as a sintered board on furniture made of silicon carbide, mullite, corundum, molybdenum or graphite.
All sizes are available in thicknesses
1,0 / 1,5 / 2,0 mm!
Ask for dimensions tailored to your needs and we will quickly create your Keralpor 99.
Typical features | Unit | Value |
---|---|---|
Color | - | white |
Gross density | g/cm3 | 2,56 |
Surface roughness Ra | µm | 0,7 |
Bending strength | MPa | >50 |
Bend | % | < 0,3 |
Porosity | Vol.% | 36 - 38 |
Average pore size | µm | 1 |
Dimensions | mm | 10 x 10 do 310 x 310 |
Standard thicknesses | mm | 1,0 / 1,5 / 2,0 |
Main ingredients | % | 99,5 Al2O3 |
Maximum operating temperature | Tmax | 1500°C |
Benefits
Usage
Вашу оцінку відгуку не було надіслано
Поскаржитись на відгук
Скаргу надіслано
Ваш відгук не надіслано
Написати свій відгук
Відгук надіслано
Ваш відгук не надіслано