![MTL4514/B – MTL5514 - Switch / proximity detector interface MTL4514/B – MTL5514 - Switch / proximity detector interface](https://www.dacpol.eu/7426-large_default/mtl4514-b-mtl5514-switch-proximity-detector-interface.jpg)
![MTL4514/B – MTL5514 - Switch / proximity detector interface MTL4514/B – MTL5514 - Switch / proximity detector interface](https://www.dacpol.eu/7426-large_default/mtl4514-b-mtl5514-switch-proximity-detector-interface.jpg)
Ви повинні увійти в систему
Фотографії призначені тільки для інформаційних цілей. Подивитися специфікацію продукту
please use latin characters
The MTLx514 enables a safe–area load to be controlled, through a relay, by a proximity detector or switch located in a hazardous area. Line faults are signalled through a separate relay and indicated on the top of the module. Switches are provided to select phase reversal and to enable the line fault detection.Specification
(*) Resistors must be fitted when using the LFD facility with a contact input: 500 Ohm to 1kΩ in series with switch 20 kOhm to 25kΩ in parallel with switch (**) Note: reactive loads must be adequately suppressed. |
Relay characteristics
SIL capable
|
Ви зацікавлені у цьому продукті? Вам потрібна додаткова інформація або індивідуальні розцінки?
Ви повинні увійти в систему
The MTLx514 enables a safe–area load to be controlled, through a relay, by a proximity detector or switch located in a hazardous area. Line faults are signalled through a separate relay and indicated on the top of the module. Switches are provided to select phase reversal and to enable the line fault detection.Specification
(*) Resistors must be fitted when using the LFD facility with a contact input: 500 Ohm to 1kΩ in series with switch 20 kOhm to 25kΩ in parallel with switch (**) Note: reactive loads must be adequately suppressed. |
Relay characteristics
SIL capable
|